http://forums.anandtech.com/messageview.aspx?catid=36&threadid=1513386&FTVAR_STKEYWORDFRM=&STARTPAGE=1&FTVAR_FORUMVIEWTMP=Linear
Which combination is required to establish a connection to initially configure the Linksys WRT300N wireless access device? a computer configured in the same IP subnet as the WRT300N and a direct cable connection to it
From a computer in the same IP subnet as the access point, enter the default IP address of the access point in a web browser.
You do not have to connect your router to your PC via ethernet cable, you can instead connect via wi-fi and your router must be connected to your hub.
How do you connect to the tv
Well why not! Wifi will connect you to a tower or the cloud and connect you to the internet.
The Linksys router model nuber is WRT54G version 8
Someone can find more information about a WRT300N online at various websites. One can find information about a WRT300N at websites such as Air-Stream and the Linksys official website.
Which combination is required to establish a connection to initially configure the Linksys WRT300N wireless access device? a computer configured in the same IP subnet as the WRT300N and a direct cable connection to it
The Linksys WRT54G router comes from the factory with an IP address of 192.168.1.1
check out this site: http://portforward.com/ specifically, this page: http://www.portforward.com/english/routers/port_forwarding/Linksys/WRT54G/WRT54Gindex.htm
The WRT54G just means that is the model number of router that you have. It's obviously created by Linksys, but different model numbers separate routers.
Yes. I am doing exactly that, right now. That's nice, so how do you do it?
51A user in a small office is unable to connect to the Internet. The user examines the physical connections to the ISR, a Linksys WRT300N, and notices a solid green LED on the port that is wired to the computer. What does the LED indicate about the current state of the port?
Yes it will. Windows 7 has stuff in it to help.
MAC address filtering uses the MAC address to identify which devices are allowed to connect to the wireless network. When a wireless client attempts to connect, or associate, with an AP it will send MAC address information. If MAC filtering is enabled, the wireless router or AP will look up its MAC address a preconfigured list. Only devices whose MAC addresses have been prerecorded in the router's database will be allowed to connect.
linskey WRT54G need password to set up wirelessly
You shouldn't need a driver for a router. Open your browser and go to 192.168.0.1