0
What else can I help you with?
How do you enable a LAN connection between two DHCP routers?
One of the routers you have to connect to internet, another one you have to connect to the first one using a lan cable. You can use any of lan ports of the first router to connect the second one (except internet port, usually it's marked as WAN or similar to). The lan cable should be connected to the WAN port on the second one. Only in such case it works properly.
A sentence for wan?
To be wan is to be faint or pale. An example sentence would be: She was so wan, it was starting to worry people.
What are the components of WAN?
Conponent of WAN are, cable,file server ,workstation
What is wan wood?
TIGER is wan WOOD It is also the wood you make wans from.
What is the importance of Wan optimization?
WAN optimization is describes techniques that try to maximize data flow across a wide area network (WAN). WAN Optimization is important for improving access to critical applications and crucial information.
Which is Port on router on public side of network?
Usually it has "WAN" or "Internet" next to it. If you still cannot find that, refer to the router's manual to find the correct port.
Is WAN port on cisco router the one labeled internet?
Yes it is.
Router port that connects a wan link?
Data Terminal Eqipment (DTE)
What physical interface does a router use to connect to a WAN link?
Ethernet port
Would a 100M WAN port on a router be a bottle neck for the 1000M wired networking ports?
Unless you have a 100Mbit+ internet connection it would not be a bottleneck at all, since the WAN port isn't part of your LAN. The WAN port only provides the LAN with internet access. If your internet connection is faster than 100Mbit, it would be a bottleneck for your internet connection, since it can't handle anything faster than that. View the router as a regular PC with a 100Mbit ethernet port (the WAN port) and a separate 1000Mbit ethernet port with a switch attached to it. As far as the LAN is concerned, it's just a 1000Mbit switch on which one host is providing/sharing its internet connection.
Does your router go in the WAN or LAN port?
Your router connects to the WAN (Wide Area Network) port to access the internet, while the LAN (Local Area Network) ports are used to connect devices within your home network. Typically, your modem connects to the WAN port of the router, and then devices like computers and printers connect to the LAN ports. This setup enables your router to distribute internet access to all connected devices.
When port forward use wan or lan?
When setting up port forwarding, you typically configure it on the WAN (Wide Area Network) side of your router. This allows external devices on the internet to access specific services hosted on your local network (LAN). By forwarding a port from the WAN to the appropriate device's IP address on the LAN, you enable communication between the two networks. Always ensure that your firewall settings are properly configured for security.
Where do you find wan raspberry to plant?
mystic groves is only farm you can grow wan raspberries on
Easiest way to set up wireless router?
The wireless router should have a plug for a power cord, a WAN port, and a switch. The power cord should be plugged into a known good outlet. The WAN port will usually be connected to the modem using straight-through patch cable.
Where can you find a wan?
if this is a starwars question than there is no such thing.
How to create a network using a 3com switch and a linksys wireless router?
Put the networkcable provided by the company that connects you to the internet into the WAN port of your Linksys router.With a networkcable connect any 3com switch port to any Linksys LAN port.
Suppose computers on your home office network are connected to a single hub but now you need to expand the network you purchase another hub assuming you use a straight through cable what port on a hub?
If there's a WAN port on your hub, use that (If your x-port hub actually has x+1 ports, chances are the extra port is actually a WAN port). Otherwise, you probably can't connect that hub to another hub using a standard patch cable and will need a crossover cable. Some hubs will allow you to switch a port between normal and WAN mode, however (I believe some Trendnet hubs have this feature?), so you might want to check first. This is usually a hardware feature - normal hubs usually are not advanced enough to contain software interfaces for a browser to interact with)
