0
What else can I help you with?
What physical interface does a router use to connect to a WAN link?
Ethernet port
Does your router go in the WAN or LAN port?
Your router connects to the WAN (Wide Area Network) port to access the internet, while the LAN (Local Area Network) ports are used to connect devices within your home network. Typically, your modem connects to the WAN port of the router, and then devices like computers and printers connect to the LAN ports. This setup enables your router to distribute internet access to all connected devices.
What section of the network connects the LAN internal to WAN external?
A Router/Modem
Is WAN port on cisco router the one labeled internet?
Yes it is.
How to create a network using a 3com switch and a linksys wireless router?
Put the networkcable provided by the company that connects you to the internet into the WAN port of your Linksys router.With a networkcable connect any 3com switch port to any Linksys LAN port.
Which is Port on router on public side of network?
Usually it has "WAN" or "Internet" next to it. If you still cannot find that, refer to the router's manual to find the correct port.
What is connected to a LAN?
computers in one office
How do you find your WAN port?
Take a look at the back of your router. It typically will be labeled "WAN". Refer to your user manual for detailed information.
What kind of physical interface does a router use to connect to a WAN link?
Ethernet ( not sure )
What section of the network connects the internal LAN to external WAN list the type of device and the connection point?
A Router/Modem
How do you simultaneosly connect two computers to internet using a router and broadband modem?
Plug the two computers in to the router, and connect the router to the modem.The router may have two kinds of ports, one port marked WAN (Wide Area Network) and several ports marked LAN (Local Area Network). If so, the WAN port goes to the modem and the LAN ports are for your computers.That's it.
Easiest way to set up wireless router?
The wireless router should have a plug for a power cord, a WAN port, and a switch. The power cord should be plugged into a known good outlet. The WAN port will usually be connected to the modem using straight-through patch cable.
