Right in the back
A microphone has a voltage output and an acoustical input. Only the sound wave can move the diaphragm of the microphone and a voltage signal comes out. That goes to to an amplifier and to a loudspeaker.
it depends on wat program ur using.
Most microphones these days plug in using a USB port, any empty port would be sufficient. Older microphones however use a seperate, specialist microphone port, often coloured red, with the speaker port next to it, which is coloured green.
A microphone is usually connected to an amplifier.
joystick and microphone
Yes, it is possible to plug a microphone into a guitar amp using a microphone input or an adapter.
If the microphone has a USB plug, then plug it into the USB port on the computer. If the microphone has an audio plug, then plug it into the audio input port on the computer. If the microphone came with any software disks, then install those after plugging the microphone into the correct port on the computer.
The Sirius Plug and Play Universal Boombox does not play CD's or MP3's directly,but it does have an auxillary plug you can use to attach a cd player or mp3 player.
I think the answer you are looking for is MICROPHONE JACK PLUG, meaning the plug/connection that fits into an amplifier or any output socket from the microphone itself. Hope this helps
To plug in a microphone to a speaker, you will need to connect the microphone's cable to the input jack on the speaker. Make sure the microphone is turned on and adjust the volume levels on both the microphone and the speaker to achieve the desired sound output.
you plug them in
A boombox USB allows you to plug portable USB music storage or any other USB audio device into your boombox. It often offer better sound than you can get through your computer's built-in audio speakers.
A boombox USB allows you to plug portable USB music storage or any other USB audio device into your boombox. It often offer better sound than you can get through your computer's built-in audio speakers.
A microphone is a source that sends an output to its male plug. A loudspeaker is a load and receives an input at its female plug.
Pull off the plug.
Pull off the plug.
To properly plug a microphone into an amp, first make sure the microphone is turned off. Then, connect the microphone cable to the input jack on the amp labeled "MIC" or "Microphone." Make sure the connection is secure. Adjust the volume levels on both the microphone and the amp as needed. Turn on the microphone and the amp, and test the sound to ensure it is working properly.