0
What else can I help you with?
Why dots are used to separate ip addresss?
Up until about five years ago, when there were enough Internet addresses for all those who needed them, Internet Addresses were written - 123.456.89. The people realised that the available range of addresses would run out very quickly when mobile phones, cars, refrigerators, etc all had their own Internet Addresses. So a new more expandable system was devised that had Internet Addresses now written as AA:12:BC:17:NM:01:JJ:89.
Which protocol is used to discover the destination address needed to be added to an ethernet frame?
ARP
What is peer ip address?
A peer IP is used by a server to communicate directly with other server(s). Meaning, two servers use peer IP addresses so nothing has to go through a third party server in between. This is needed to speedup the data transfer between two servers. An example of this would be online gaming or file sharing...
What is the difference between IP4 and IP6?
IPv6 is based on IPv4, it is an evolution of IPv4. So many things that we find with IPv6 are familiar to us. The main differences are:1.Simplified header format. IPv6 has a fixed length header, which does not include most of the options an IPv4 header can include. Even though the IPv6 header contains two 128 bit addresses (source and destination IP address) the whole header has a fixed length of 40 bytes only. This allows for faster processing.Options are dealt with in extension headers, which are only inserted after the IPv6 header if needed. So for instance if a packet needs to be fragmented, the fragmentation header is inserted after the IPv6 header. The basic set of extension headers is defined in RFC 2460.2.Address extended to 128 bits. This allows for hierarchical structure of the address space and provides enough addresses for almost every 'grain of sand' on the earth. Important for security and new services/devices that will need multiple IP addresses and/or permanent connectivity.3.A lot of the new IPv6 functionality is built into ICMPv6 such as Neighbor Discovery, Autoconfiguration, Multicast Listener Discovery, Path MTU Discovery.4.Enhanced Security and QoS Features.Answer:IPv4 means Internet Protocol version 4, whereas IPv6 means Internet Protocol version 6.IPv4 is 32 bits IP address that we use commonly, it can be 192.168.8.1, 10.3.4.5 or other 32 bits IP addresses. IPv4 can support up to 232 addresses, however the 32 bits IPv4 addresses are finishing to be used in near future, so IPv6 is developed as a replacement.IPv6 is 128 bits, can support up to 2128 addresses to fulfill future needs with better security and network related features. Here are some examples of IPv6 address:1050:0:0:0:5:600:300c:326bff06::c30:0:0:0:0:0:192.1.56.10The most important difference is that it has a larger address space. IPv6 uses 128 bits, instead of the 32 bits used in an IPv4 address.There are also some changes in the header format, and some additional options, like built-in security options. These can be added to IPv4 through additional protocols, so this is really no big deal.IPv4 is like 10.36.05.2 while IPv6 is one huge garble.IPv4 is a 32 bits IP address that we use commonly, it can be 192.168.8.1, 10.3.4.5 or other 32 bits IP addresses. IPv4 can support up to 232 addresses, however the 32 bits IPv4 addresses are finishing to be used in near future, so IPv6 is developed as a replacement.IPv6 is 128 bits, can support up to 2128 addresses to fulfill future needs with better security and network related features.Here are some examples of IPv6 address:1050:0:0:0:5:600:300c:326bff06::c30:0:0:0:0:0:192.1.56.10For More help, you can visit website:http://www.iyogibusiness.comThe main difference, at least the one that is most relevant for a transition from version 4 to version 6, is the length of the addresses. IPv4 uses 4 bytes; IPv6 uses 16 bytes for the address.Mainly, IPv6 has a larger addressing space; IPv6 addresses use 128 bits instead of 32 bits.
Why are the buffers often needed on the address and data and control buses in a microcomputer system?
Buffer is a logic circuit that amplifies current or power.It is used in address and data buses to increase their driving capability.
What is address nickname?
derek
How many IP addresses would be needed to assign a unique IP address at US?
To assign a unique IP address to every person in the United States, we would need approximately 331 million unique IP addresses, based on the estimated population. However, since IP addresses can be assigned to devices rather than individuals, the total number of required addresses might be higher, considering the increasing number of internet-connected devices per person. IPv4, which allows for about 4.3 billion addresses, would suffice for this purpose, but transitioning to IPv6, which provides a virtually limitless number of addresses, is essential for future scalability.
Why both physical address is needed for data transfer in a network?
Both physical addresses (MAC addresses) and logical addresses (IP addresses) are needed for data transfer in a network to ensure proper routing and delivery. The logical address identifies the device within a specific network and facilitates communication across different networks, while the physical address uniquely identifies a device on a local network segment. This two-tier addressing system enables efficient data transfer by allowing packets to be routed accurately from source to destination through various network layers.
What is the advantage of dynamic IP addresses?
With a static IP address you have to manually configure each workstation, by hand. Doing so can lead to duplication errors because you mistyped an address that is already in use. You might also get the other settings wrong, such as the default gateway, DNS servers, etc. With DHCP you can more easily manage your address space in a network, and there will be no duplication because DHCP will not give out the same address twice. Other settings can be set once and then distributed to workstations automatically, without error. Finally, you can save on IP addresses because the workstations will use the addresses only as long as they need them, and then return them to the pool for other to use. With static addressing that will never happen, and you might run out of addresses for your network.
What process hides multiple IP addresses behind a single IP address?
The process that hides multiple IP addresses behind a single IP address is called Network Address Translation (NAT). NAT allows multiple devices on a local network to share a single public IP address when accessing the internet. It works by translating the private IP addresses of the devices into the public IP address, managing the connections and ensuring that the correct data is sent back to the appropriate device. This enhances security and conserves the number of public IP addresses needed.
How IP addresses are needed to identify computers on a network and what they look like.?
A typical IP address takes the form of 256.256.256.256 - Each IP address is unique - and identifies a single computer connection.
Why is NAT not needed in IPv6?
Any host or user can get a public IPv6 network address because the number of available IPv6 addresses is extremely large.​ smb
What is an Internet id?
An Internet address is the same differe4nce as a street /local address with the advantage of portability. Up till now Internet addresses have been written 123.456.789. This worked until it was realised that more addresses were needed than were available. From now on Internet addresses will be written as A1:BB:15:01:HU:AA:99. This gives those people will mobile phone their own address on the Internet as well as allowing fridges, cars, homes, etc.
Is there a group of ip address reserved by US army?
The Army specifically, no, but the Department of Defence has several blocks of reserved IP addresses, which will be delegated to each branch of service as needed.
Nicks email address?
There are many famous people named Nick. More information is needed to give the proper email address. Though not all share publicly their email addresses most do have social media accounts where they may be reached.
How many bit address bus you need to address the memory locations from 0 to 2059 of a RAM?
To address memory locations from 0 to 2059, you need to determine how many unique addresses are required. The total number of addresses is 2059 - 0 + 1 = 2060. To find the number of bits needed for the address bus, calculate (2^n \geq 2060). Since (2^{11} = 2048) (not sufficient) and (2^{12} = 4096) (sufficient), you need a 12-bit address bus.
What are the four functions of dhcp?
The four primary functions of DHCP (Dynamic Host Configuration Protocol) are: IP Address Allocation: DHCP automatically assigns IP addresses to devices on a network, ensuring that each device has a unique address. Configuration Information: It provides essential network configuration parameters, such as subnet mask, default gateway, and DNS server addresses. Lease Management: DHCP manages the lease of IP addresses, allowing addresses to be reused and ensuring efficient use of the available IP address space. Dynamic Updates: It enables devices to request new IP addresses as needed, facilitating easy network changes and mobility for devices.
