An OC12 is the equivalent of 4 OC3's or 12 DS3's. A DS3 Breaks down to 28 T1's. Therefore there are 336 T1's on an OC3. If you go one step further there are 672 DS0's on a DS3 or 8064 DS0's on an OC12. a DS0 is a 64k Channel equal to a single POTS line. http://techblog.intelletrace.com/what-is-a-ds3-hub/
A DS3 is a telecommunications circuit capable of transmitting and receiving 45 Mbps at the same time. A DS3 is generally delivered using an OC3 or higher capacity circuit then is muxed out to a DS3. A DS3 hands off as two 75Ohm coax cables.DS3 Cable Type734 Cable = 450 Feet (137.2M) RG59 Cable = 340 Feet (103.6M) 735 Cable = 225 Feet (68.8M) You can order this type of service from Intelletrace.com 415-493-2200
DS3 is 44.7 Mbps and a T1 is 1.55 Mbps. So 1 DS3 = 28 T1s http://www.dslbroker.com/ds3.html
Point-to-point interfaces are used in serial communication. These types of connections are assumed to transmit solely to the station at the opposite end. The examples of Point-to-point are EIA/TIA 232, EIA/TIA 449, X.25, Frame Relay, T-carrier, and OC3 - OC192. simply: 1 source port to 1 destination port Point-to-multipoint connects one station to several other stations. Point-to-multipoint are of two types • Point-to-multipoint Non-Broadcast • Point-to-multipoint Broadcast In Point-to-multipoint Non-broadcast, the communication is replicated to all the remote stations. Only specific, selected stations hear the replicated communication. The examples are Frame Relay and ATM. simply: 1 source port to multiple destination ports
How many versions of AutoCAD are there
An OC3 breaks down to three DS3's. A DS3 Breaks down to 28 T1's. Therefore there are 84 T1's on an OC3. If you go one step further there are 672 DS0's on a DS3 or 2016 DS0's on an OC3. a DS0 is a 64k Channel equal to a single POTS line. http://techblog.intelletrace.com/what-is-a-ds3-hub/
A T1 is copper, and OC3 is fiber optic, so there is no way to make a T1 into OC3. Speed on a T1 is 1.544 Mbps, and speed on the OC3 is 155.52 Mbps, so in rounding, you need 100 T1 lines to equal the speed of an OC3.
An OC12 is the equivalent of 4 OC3's or 12 DS3's. A DS3 Breaks down to 28 T1's. Therefore there are 336 T1's on an OC3. If you go one step further there are 672 DS0's on a DS3 or 8064 DS0's on an OC12. a DS0 is a 64k Channel equal to a single POTS line. http://techblog.intelletrace.com/what-is-a-ds3-hub/
A DS3 is a telecommunications circuit capable of transmitting and receiving 45 Mbps at the same time. A DS3 is generally delivered using an OC3 or higher capacity circuit then is muxed out to a DS3. A DS3 hands off as two 75Ohm coax cables.DS3 Cable Type734 Cable = 450 Feet (137.2M) RG59 Cable = 340 Feet (103.6M) 735 Cable = 225 Feet (68.8M) You can order this type of service from Intelletrace.com 415-493-2200
An OC12 is equal to 4 OC3 bandwidth connections.
how many DS3's are in an OC192
3 ds3 in stm1
A DS3 has 28 T1's http://techblog.intelletrace.com/what-is-a-ds3-hub/
DS3 is 44.7 Mbps and a T1 is 1.55 Mbps. So 1 DS3 = 28 T1s http://www.dslbroker.com/ds3.html
an OC48 has 48 DS3's.
672 DS0 make 1 DS3
In terms of data transmission speed, OC-3 is stronger than T-3. OC-3 has a transmission speed of 155.52 Mbps while T-3 has a transmission speed of 44.736 Mbps.