0
16 384 networks are available in Class B network.
Wiki User
∙ 6y ago
Wiki User
∙ 14y agoYou start by finding out how many network bits are reserved in a class B: there are 14 bits, so 214 yields 16384 networks for a class B.
Wiki User
∙ 9y agoIn class C there are 3 network bits and 1 host bit.
Wiki User
∙ 12y ago16284
Add your answer:
Earn +20 pts
How many hosts can possible in a class A ip range?
class A ip has 16777216 host but valid hosts are only 16777214.(2^24-2)So answer is 16777214 hosts
If you have the following Network ID 131.112.0.0 You need at least 500 hosts per network How many networks can you create What subnet mask will you use?
If you need to divide it up into the maximum number of subnets containing at least 500 hosts each, you should use a /23 subnet mask. This will provide you with 128 networks of 510 hosts each. If you used a /24 mask, you would be limited to 254 hosts. Similarly, a /22 mask would be wasteful, allowing you 1022 hosts.
How many networks and addresses are available for class b ip addresses?
First octet rule for each class:Class A: 0xxxxxxxClass B: 10xxxxxxClass C: 110xxxxxClass A range is 0 - 1270.0.0.0 and 127.0.0.0 are not "routable" IP addresses. One defines all networks and the other is the loopback. We have a total of 126 usable networks and 16,777,214 usable hostaddresses per network. There are even less if we don't count the private address of 10.0.0.0 (RFC 1918).Class B range is 128 - 191There are 16,384 total networks in this class; that's including the private addresses of 172.16.0.0 - 172.31.0.0 (RFC 1918). There are a total of 65,534 usable host addresses per network.Class C range is 192 - 223There are 2,097,152 total networks in this class; that's including the private addresses of 192.168.0.0 - 192.168.255.0 (RFC 1918). There are 254 usable hosts addresses per network.
How many network and host bits are available for class C IP address?
By default Class C subnet mask is 255.255.255.0 = 24 bits for network id and 8 bits for host id. in Binary 1111 1111. 1111 1111. 1111 1111. 0000 0000 Here all 1s are Network bits and all 0s are host bits. For this subnet mask you can have 256 hosts. And you can use 254 host and asign IP address to them. By Saurabh
How many ip addresses are there in a class A?
There are 2^24 host in class A but (2^24)-2 hosts are valid since the first and last address are reserved .
How many hosts can a A class network accommodate?
16 000 000
If you borrow 10 host bits from a Class B network address how many usable hosts are left?
62 hosts.
How many hosts are attached to each local area network?
254
How Given a Class C network 200.1.1.0 We want 5 subnets each with 30 hosts on it. How many bits to borrow How many bits to leave What is the subnet mask ( in dot notation and in CIDR notation)?
Given a Class C network: 200.1.1.0 We want 5 subnets, each with 30 hosts on it. How many bits to borrow ? How many bits to leave? What is the subnet mask? ( in dot notation and in CIDR notation)
How many hosts can possible in a class A ip range?
class A ip has 16777216 host but valid hosts are only 16777214.(2^24-2)So answer is 16777214 hosts
How many bits class A networks are reserved for private address space?
in Class A addresses the first bit identifies the class. The next 7 bits identify the network and the rest are the IP's that belong to that network. However these networks are then broken down using subnets . Class A networks are not given to private clients or small private organisations. So if you want to know how many bits are there for identifying hosts in a Class A network, the answer is 32-8 = 24 bits. However if you mean how many bits are reserved for hosts in your private network space, that depends on your subnet and router. Most routers use NAT to allow multiple hosts to use a single external IP address. I hope this answers your question :)
What IP addresses are subnetted A 139.233.12.12 255.255.255.0 B 10.0.0.1 255.255.255.0 C 192.168.0.1 255.255.255.0 D 190.233.17.3 255.255.255.0?
A, B and D are subnets. C is not. IP addresses A and D are both Class B subnets. Class B addresses normally have a subnet mask of 255.255.0.0. The first two bits of a class B network are always 10 which leaves 14 bits for the network prefix, thus allowing up to 16,384 separate Class B networks (including 139.233.0.0 and 190.233.0.0). The last 16 bits denote the host number thus there can be up to 65,536 hosts per network. By specifying a subnet mask of 255.255.255.0 the network can be divided into as many as 256 separate subnets each with 256 hosts. IP address B is a Class A subnet. Class A addresses normally have a subnet mask of 255.0.0.0. The first bit of a class A network is always 0, which leaves 7 bits for the network prefix, thus allowing up to 127 Class A networks (including 10.0.0.0). The last 24 bits denote the host number thus there can be up to 16,777,216 hosts per network. By specifying a subnet mask of 255.255.255.0, the hosts can be divided into as many as 65,536 separate subnets each with up to 256 hosts. IP address C is a Class C address, but is not a subnet. Class C addresses normally have a subnet mask of 255.255.255.0. The first three bits in a Class C network are always 110, leaving 21 bits for the network prefix, thus allowing up to 2,097,152 Class C networks (including 192.168.0.0). The last 8 bits denote the host number thus there can be up 256 hosts per network. To make a subnet out of a Class C address you must have a subnet mask of 255.255.255.X, where X may be 192, 224, 240, 248 or 252. That is, 2, 3, 4, 5 or 6 bits to denote the subnet and the remaining bits to denote the hosts. Thus a subnet mask of 255.255.255.192 would allow as many as 4 subnets each with up to 64 hosts, while a subnet mask of 255.255.255.240 would allow as many as 16 subnets each with up to 16 hosts. It should be noted that the maximum number of hosts is actually 2 less than the figures shown above. This is because the host address with all 0 bits is reserved for network address while the host address with all 1 bits is reserved for broadcasting.
How many subnets and hosts per subnet can you get from the network 172.16.0.0?
There are 16 bits available; it is up to you how many of those bits you reserve for the subnet, and how many for the individual hosts within each subnet.
If you have the following Network ID 131.112.0.0 You need at least 500 hosts per network How many networks can you create What subnet mask will you use?
If you need to divide it up into the maximum number of subnets containing at least 500 hosts each, you should use a /23 subnet mask. This will provide you with 128 networks of 510 hosts each. If you used a /24 mask, you would be limited to 254 hosts. Similarly, a /22 mask would be wasteful, allowing you 1022 hosts.
How many networks and addresses are available for class b ip addresses?
First octet rule for each class:Class A: 0xxxxxxxClass B: 10xxxxxxClass C: 110xxxxxClass A range is 0 - 1270.0.0.0 and 127.0.0.0 are not "routable" IP addresses. One defines all networks and the other is the loopback. We have a total of 126 usable networks and 16,777,214 usable hostaddresses per network. There are even less if we don't count the private address of 10.0.0.0 (RFC 1918).Class B range is 128 - 191There are 16,384 total networks in this class; that's including the private addresses of 172.16.0.0 - 172.31.0.0 (RFC 1918). There are a total of 65,534 usable host addresses per network.Class C range is 192 - 223There are 2,097,152 total networks in this class; that's including the private addresses of 192.168.0.0 - 192.168.255.0 (RFC 1918). There are 254 usable hosts addresses per network.
How many valid host IP addresses does each Class A network contain?
256
How many users can be on the network at once?
Depends on the network. Peer-peer = 10 computers other networks can have as many as they want. Generally 253 hosts is on one network.
