0
Mainly 5 types of cables are used in computer networking.
1. Twisted pair cable - Twisted pair cabling is a form of wiring in which two conductors (the forward and return conductors of a single circuit) are twisted together for the purposes of canceling out electromagnetic interference (EMI) from external sources; for instance, electromagnetic radiation from unshielded twisted pair (UTP) cables, and crosstalk between neighboring pairs.
2. Optical fiber cable - An optical fiber cable is a cable containing one or more optical fibers. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable will be deployed.
3. Coaxial cable - Coaxial lines confine the electromagnetic wave to the area inside the cable, between the center conductor and the shield. The transmission of energy in the line occurs totally through the dielectric inside the cable between the conductors. Coaxial lines can therefore be bent and twisted (subject to limits) without negative effects, and they can be strapped to conductive supports without inducing unwanted currents in them.
4. Patch cable - A patch cable is an electrical or optical cable, used to connect one electronic or optical device to another for signal routing. Devices of different types (ie: a switch connected to a computer, or switch to router) are connected with patch cords. It is a very fast connection speed. Patch cords are usually produced in many different colors so as to be easily distinguishable, and are relatively short, perhaps no longer than two metres.
5. Ethernet crossover cable - An Ethernet crossover cable is a type of Ethernet cable used to connect computing devices together directly where they would normally be connected via a network switch, hub or router, such as directly connecting two personal computers via their network adapters.
What else can I help you with?
Which type of cabling is easiest to install?
In computer networking, the type of cabling that is easiest to install is coaxial cable. It is a light, inexpensive and flexible cable.
Which statement correctly characterizes cable types and their usage?
Fiber optic cable is primarily used for networking within a single building.
What is a coaxial networking cable and what is its use?
Coaxial cable uses an internal piece of copper wire, surrounded by plastic insulation which then has another layer of copper strands before the outer layer of insulation. This is used mostly for radio signals, connecting antennas to things, as well as transferring digital networking signals.
What is the practical use of baseband coaxial cable?
Iam pretty sure that baseband coax was 50 ohm and was used for networking computer, were broadband coax is 75 ohm and used in the cable tv industry.
What type of networking device would allow the PCs to communicate?
A Router.
Does it matter what type of networking cable you use in your network?
Ethernet is a good choice for networking.
Which type of punch down block is used to terminate a data networking cable?
110-block is for data networking cable. The 66-block is for telephone cable.
Which type of cabling is easiest to install?
In computer networking, the type of cabling that is easiest to install is coaxial cable. It is a light, inexpensive and flexible cable.
Difference between coaxial cable and STP cable used for computer networking?
Difference between coaxial cable and STP cable used for computer networking?
How many pairs are used on a straight through cable?
When using a straight through cable for networking, only 3 pairs are used.
Which is the latest networking cable?
cat A
How does cable modem networking work?
For cable modem networking to work the cable modem will need to be connected to a network hub. This will allow all computers in the network to connect to the internet.
What is the maximum length of a 1000ft Cat6 cable that can be used for networking purposes?
The maximum length of a 1000ft Cat6 cable for networking is 328 feet.
What is the maximum length of a Cat3 Ethernet cable that can be used for networking purposes?
The maximum length of a Cat3 Ethernet cable that can be used for networking purposes is 100 meters.
How you can connect a computer to another computer by a single networking cable?
You have to have a special cable which is "cross connection cable" or something like that.
Two types of cable in computers?
There is the USB cable and the twisted pair cable (Cat 5 and Cat 6) for networking.
What is the maximum length of a Cat 3 Ethernet cable that can be used for networking purposes?
The maximum length of a Cat 3 Ethernet cable that can be used for networking purposes is 100 meters.
