0
I'm not sure but nobody was walked on mars!
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How long does it take to land on Mars?
About 10 months.
Why could more technology make sustainability more difficult?
you are about to live on Mars.
What does aniwzcs2 service do for the computer?
ANIWZCS2 Service is an "All-Knew Old Fashioned Updated Hi-Tech Wiz-Bang" feature on your computer.For the purpose of this Walter Mitty Rocket Launching tale, a rocket is about to be launched into outer space and you are in command of the helm of the rocket launch button. The name of this new rocket is the "Dlink".Think of the "ANIWZCS2 Service" this way:Imagine yourself working at the NASA Space center in Houston. You're in a fairly large white room known as "Mission Control" otherwise known as your computer.From the outside, your Mission Control room appears to be all locked and boarded up, all closed in from top to bottom like some big old spooky house.You imagine what's going on behind closed doors. As you set outside as an innocent by-stander, a new program called "Green Space Flight Z-77" is underway. A "GREEN" collective unit designed to line the pockets of executives of our Space Program with allot of GREEN MONEY. That's the only GREEN thing about it.In actuality INSIDE those locked doors everything is totally sanitized with white floors and walls with more all-new hi-tech wiz-bang electonic gadgets than Carter has pills.Just for sport, let's call that room "Mission Control" and you're the Head Honcho, the Big Cheeze, the Big Boss Man, MISTER BIG SHOT.Imagine - As you set at your NASA personalized station at Mission Control, you once again notice your computer's "On-Off" button is lit up. You closely assess a legion of little switches and buttons in a semi-circle fashion in front of you.You're about to push the round Launch Button to launch the "Dlink Rocket" from it's launching pad into outer space. The Rocket Launch Button on your desk is back-lit in a yellow color and with embossed words, "ANIWZCS2 Launch Pad Service" It's like Pre-Staging at a drag strip to activate the yellow light.OKay, now you're pre-staged!You push the "ANIWZCS2 Launch Pad Service" and white smoke rolls out from under the rocket in all directions as the rocket sets on the launch pad powering it's thrust rockets for take-off. That let's you know the "ANIWZCS2 Launch Pad System" is in operation.Now you're staged!You look down at the legion of hi-tech wiz-bang gizmos on your desk and you notice a small round yellow light telling you, "Your ANIWZCS2 Launch Pad System is in operation and is now transferring power to launch the Dlink Rocket".Time for final stage of lift-off: You push the green button, "Dlink Take-Off".The green lights go on and you have lift-off!You look down at the legion of hi-tech wiz-bang gizmos on your desk and you notice a small round green light telling you, "Your ANIWZCS2 Launch Pad System worked successfully (similar to the way a Trans-Brake works in a drag race car.) Power was transferred to launch the Dlink Rocket".The Astronaut reports back to you over the loudspeaker, "Houston this is Dlink reporting a successful lift-off with all WPA/WPA2 encrypted networks fully operational and in use."Stay tuned for the next Walter Mitty "FTP Rocket to Mars Mission".
How do you clean the contact edges of an interface card?
Great question. There are different "cautions" depending whether the contacts are only solder coated or most likely gold plated. Unless you have some really old stuff like I do, let's assume the contacts are gold. In the electronics biz, gold is expensive and though the contacts look like gold, they only have a 15 or possibly 30uInch layer of gold (sometimes only 10u" of gold). Thus the actual gold layer is very thin. There are basically two approaches: If the contacts are gold plated, then using ONLY a soft rubber eraser, gently "erase" the oxides and markings from the fingers, then blow or wipe them off with a cloth or paper towel. It's strongly recommended to use a ground strap on your wrist connected to the computer's chassis. Lacking that, first touch the chassis, then the card, and place the card on a grounded (chassis) surface like the power supply (unplugged of course). Use gentle pressure on the soft eraser and wipe the fingers back to gleaming gold. Too much rubbing or using a harsh eraser can remove the plating. Remember to do both sides! If the fingers are silver colored, then they are simply lead (solder) plated and not as delicate. I would still use a soft eraser, but you can use a little more force to scrub the solder bright again. If you are asking how to clean off some other foreign substance, I'd use a Q-tip swab with water first. If that doesn't remove the debris, then use isoproponol or medical rubbing alcohol to clean the debris off. If there were debris you had to clean off (hey accidents happen!), then once dry, use a soft eraser to buff the contacts until they're bright and shiny. Remember, don't go using an "ink eraser" which is very harsh, and use a soft pencil eraser or better yet, a white plastic eraser like those used for drafting (Mars plastic?). I forget the name brand, but they're among the safest erasers to use. When done, don't touch the contacts, but look at them under a light. They should all be uniformly bright and clean. Now, if there was an "accident", you would also need to inspect the connector for debris. For that, since an "accident" typically is some water based liquid, a moist Q-tip gently used along the connector contacts should help clean them up pretty well.. Be careful not to leave cotton lint in the connectors! Barring the connector cleaning, once the card has been cleaned, insert into the connector and pull it out and reinsert a few times, gently. this will tend to clean the connector but after doing that, you might have to touch up the card fingers with the soft eraser. If the connector is ok, and the card contacts are all shiny and uniform, then you should be good to go.
What is the most technologically advanced nation?
Opinion: This is shared between China(who doesn't release their technology and the commoners there know little about it), Japan(who happily sells it to America-mostly relating robots, other automatons, and video games), and America(who buys it from the other two countries and either expands on it, or invents the basis for it). 1. United States of America 2. Russia 3. China 4. United Kingdom 5. Japan I think it's: 1 Japan 2 US of America 3 Russia 4 Germany 5 China 6 Israel
What was the name of the first mars space probe expeditions that did not land on mars?
The first probe to land on Mars was called, the Hubble space craft.
Where did the first rocket go?
to mars
When did the first rocket go to mars?
1985
What was the name of the first mars space probe expedition that did not land on mars by the us?
viking 1
What was the name of the first spacecraft to land on mars?
First ever satellite to land on the planet Mars was a Russian probe called Mars 2. Albeit it did not land but crashed. The first successful probe to land on Mars was Mars 3 sent by the Russians, however the probe was operational for 15 minutes after landing on Mars. The first American probe to land on Mars was the Viking 1 on the 20th of July 1976.
When was Viking 1 rocket made?
Viking 1 was actually a Martian space probe launched in 1975 by NASA. It was the first successful probe to land on Mars. It was launched by a Titan rocket with a Centaur upper stage.
When did the first space shuttle land on Mars?
The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.The Space Shuttle never landed on Mars. In 1971, the Russian Mars 2 and Mars 3 probes were the first things to land on Mars.
What was the name of the first spaceship to Mars?
It was Mars 2, from the Soviet Mars Lander Program.
Who was the first astronaut to land on mars?
No astronaut has ever been to Mars.
Are there still people on a rocket ship heading to mars?
There is no one in a rocket ship heading to Mars.
What could stop a rocket headed to Mars?
A meteorite would crash into a rocket heading towards mars
First object to land on the surface of mars?
Mars 2 Lander (USSR)
