0
What else can I help you with?
What is RJ59 used for?
I havent the slightest! iLogic101 says: RJ59 is coaxial cable which is used to transmit video and internet data. This is the thick round cable that goes into your cable box and/or cable modem.
Name the two basic types of transmission line which is most widely used?
coaxial cable and twisted pair cable. coaxial cable is the most widely used type of transmission line.
What is function of coaxial cable?
coaxial cable has a solid copper or copper-clad-steel centre conductor surrounded by a non-conductive dielectric insulating material. The dielectric is surrounded by foil shield/s and/or copper braid/s which form the outer conductor and also shield against electromagnetic interference (EMI). The outer conductor/shield is encased in a PVC jacket.
Is RG59 Coaxial Cable compatible with RG6 Coaxial Cable?
yes RG6 should be used exclusively for satellite hookups and digital CATV. RG59 is fine for analog CATV signals but will not support the higher bandwidth used for satellite signals.
What is the practical use of baseband coaxial cable?
Iam pretty sure that baseband coax was 50 ohm and was used for networking computer, were broadband coax is 75 ohm and used in the cable tv industry.
What are cable connectors often used for?
Cable connectors are used on coaxial cables, which are ports in the wall that connect to a TV. The connectors are used to either link together two coaxial cables or split it off into more than one.
Which of the following connectors is commonly used on a coaxial cable?
The most common connectors for coaxial cables are F-type and BNC.
What kind of wire is used with cable modem?
Coaxial and ethernet. The round one is coaxial, the rectangular ones are ethernet.
What type of connector is used with RG-58 coaxial cable networking?
RG-58 coaxial cable typically uses BNC connectors for networking applications, especially in older Ethernet networks and RF applications. These connectors provide a secure and reliable connection, allowing for quick disconnection and reconnection. Other connectors that may also be used with RG-58 include N connectors and TNC connectors, depending on the specific requirements of the setup.
How are RF connectors used in cars?
RF connectors are designed to maintain the shielding that the coaxial design offers and are typically used with coaxial cables.
What is RJ59 used for?
I havent the slightest! iLogic101 says: RJ59 is coaxial cable which is used to transmit video and internet data. This is the thick round cable that goes into your cable box and/or cable modem.
Difference between coaxial cable and STP cable used for computer networking?
Difference between coaxial cable and STP cable used for computer networking?
What type of coaxial cable do you need for digital aerial to a TV set?
For connecting a digital aerial to a TV set, you typically need a coaxial cable with an impedance of 75 ohms, which is the standard for most television signals. RG-6 coaxial cable is commonly used for this purpose due to its excellent signal quality and resistance to interference. Ensure that the cable is of good quality and properly terminated with F-type connectors for optimal performance.
How do the characteristics of coaxial cable compare with twisted-pair cable?
Both the coaxial cable and twisted pair cable have a basic connection medium for network cabling. <<>> Coaxial cable can be used for transmission of RF (radio frequencies) whereas Cat 5 (twisted pairs cable) can not.
Name the two basic types of transmission line which is most widely used?
coaxial cable and twisted pair cable. coaxial cable is the most widely used type of transmission line.
Technical term for the kind of cable that carries a tv signal?
There are two types of cable used for television radio frequency signals: 300 ohm twin lead flat cable and 75 ohm coaxial cable. The twin lead is typically used with a rabbit ears antenna and coaxial is typically used with roof top antenna or cable TV setups.For television baseband video signals coaxial cables are usually used.However for digital television baseband video signals these are not adequate and special cables (e.g. HDMI, DVI, DisplayPort) are used. These cables are typically many twisted pairs in a common shield.answer is Coaxial cable
Name of a cable connector that would be used if the cable was coaxial?
BNC connector
