0
What else can I help you with?
What type of cable and connectors are used to connect a modem to a phone port?
To connect a modem to a phone port, a standard telephone cable, often referred to as an RJ-11 cable, is used. The connectors on each end of the cable are RJ-11 connectors, which fit into the phone port on the wall and the modem. This type of connection is typically used for DSL modems that utilize existing telephone lines for internet service.
Round connectors used by coaxial cable?
BNC
What connector or connectors are used with Speaker Cable?
Speaker cable can be used bare or with pin, banana, spade or ring terminals.
Do you sell cable connectors for the printer cables?
Cable connectors are always avaible for printer cables.
Which of the following connectors is commonly used on a coaxial cable?
The most common connectors for coaxial cables are F-type and BNC.
Audio Connectors?
Audio connectors and video connectors are electrical connectors for carrying audio signal and video signal, of either analog or digital format. Analog A/V connectors often use Shielded cable to inhibit radio frequency interference (RFI) and noise.
How do you connect a cable box to a stereo receiver?
Connect a audio cable from the Audio Out connectors on the cable box to the AUX In Audio connectors on the stereo receiver.
What are audio cables?
Audio connectors and video connectors are electrical connectors for carrying audio signal and video signal, of either analog or digital format. Analog A/V connectors often use Shielded cable to inhibit radio frequency interference (RFI) and noise. They use connectors such as SPEAKON, XLR, TRS and RCA.
What type of connector is used with RG-58 coaxial cable networking?
RG-58 coaxial cable typically uses BNC connectors for networking applications, especially in older Ethernet networks and RF applications. These connectors provide a secure and reliable connection, allowing for quick disconnection and reconnection. Other connectors that may also be used with RG-58 include N connectors and TNC connectors, depending on the specific requirements of the setup.
What does an AV cable look like?
An AV cable typically has three color-coded connectors: red, white (or black), and yellow. The red and white connectors are for audio (right and left channels), while the yellow connector is for composite video. The cable itself is usually a thick, flexible cord, and the connectors are often made of plastic with metal tips. AV cables are commonly used to connect devices like DVD players, game consoles, and older TVs.
How can you tell that a particular ribbon cable should only be used to connect a floppy drive?
The connectors on the ends of the cable are a different size than the connectors for a standard IDE device like a Hard Drive or CD rom. You should also notice that there is a twist in the cable between two of the connectors.
What is the function of RG6 cable?
RG6 cable is a coaxial type commonly used for domestic video systems. It is most often used as a feed from an antenna or from a satellite dish to receivers. As well as RF signals, the cable can also be used to carry base band video signals although this is not a common application for this type of cable. There are a number of connectors used with it including F conectors, BNC, RF and UHF types.
