0
What else can I help you with?
What power connecter should you connect to a floppy drive to a power supply?
A "Berg" connector.
Which connections should be provided to a floppy disk drive during installation?
Connecting a floppy Drive in a Desktop ComputerYou should connect the 4-Pin 12 Volt non-molex Connector from the power supply to the power input of the Floppy Disk Drive, also the IDE ribbon cable from the FDD output on the Main-board to the FDD input on the Floppy Disk Drive, with the pink stripe on the outside of the FDD Input & Output sockets, it is important to make sure you are grounded to the case whilst doing this with the PC Power Cord plugged in but switched off
How do you put pictures from a camera that uses floppy disks onto a computer?
Usually, you will just need to insert the floppies into the floppy disk drive on a computer. If your computer does not have a floppy drive (most made since 2003 don't), you will need to purchase an external floppy drive. These connect to your computer through a USB port. After you plug it in and insert a disk, you should be able to find the drive and view your pictures.
A technician is troubleshooting a computer that has a malfunctioning floppy drive The technician observes that the floppy drive light remains lit constantly How should the technician attempt to repa?
The cable is probably damaged, or the idiot just plugged it in backwards. He should first attempt to plug the cable in upside-right. If that fails, he should then try a different floppy cable.
How frequently should you format a floppy disk?
As little as possible. Floppy disks are prone to corruption and should be accessed as little as possible. It would be generally advised that no data should be stored on a floppy disk, and that any data you have on floppy disk should be removed and backed up on a more reliable format such as flash memory.
Can you connect a nas drive to a network extender?
You should be able to but it all depends on particular set of hardware you are running.
What kind of music should you use for a ribbon dance routine?
you should use classical music for a ribbon dance
What ribbon should a Remington monarch typewriter have?
Product ID: BR277 universal ribbon
How can you disable the floppy disk from the regestry?
The best way to disable a floppy disk drive is to disable the floppy interface from the system BIOS. This should remove all traces of the floppy disk drive to the operating system. It is also easier to reverse should the disk need to be enabled again later,
When not in usea floppy disk storing vital information should be?
When floppy disks are not in use, they should not be touched. They should also be stored properly and the information should be backed up on another medium, if possible.
How much should you feed a floppy rabbit?
twice a day.
When connecting a floppy disk drive cable to a signal cable to the floppy disk drive what precaution should be taken?
Unplug the power cord
