answersLogoWhite

0

Most of the motors are usually controlled by the soft starters which usually trip frequently. One of the steps in find why the soft starter has tripped is looking at the motor circuit protector rating.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What would cause a three phase soft starter to trip working with a plc program?

A three-phase soft starter may trip due to several reasons, including overcurrent conditions, phase imbalance, or a fault in the motor or load. If the PLC program is not properly configured, it may cause the soft starter to misinterpret operational parameters, leading to premature tripping. Additionally, settings like overload or under-voltage thresholds may be incorrectly set, causing the soft starter to activate its protective features. Lastly, external factors like power supply issues or mechanical blockages in the motor can also contribute to tripping.


In 3 pH Delta motor connection the upstream ACB is tripping due to ground fault protection while motor starts with soft starter why?

Check the earth fault trip off set limit of the ACB. It may be too low.


How Soft starter work?

nothing


How a soft starter works?

nothing


What are the different types of starter?

DOL, Star Delta, Soft starter, VFD


Soft starter for a dc motor?

It is an advanced power electronic device to start the motor with a very smooth starting curve. It is next generation starter compared to DOL or star Delta starter


What device may be wired into the starting circuit of a motor to improve the starting torque?

I assume a 3 phase, AC induction motor. A star delta starter or a soft starter can be used. A soft starter is better compared to a star delta starter, but it is more expensive.


How do you get a shiny starter in pokemon platnium?

You could cheat or soft reset.


Which is better inverter or soft starter?

An inverter is just a device to invert one form of electrical power supplied to its input into another form of electrical power as its output. A soft starter may be included into an inverter design, its function is just to provide temporary power to the inverter until it gets started. After that the soft starter is disabled, usually by a diode feedback link.


What is a soft starter?

A soft start is a starter that bring a motor from the starting point of a slow speed in to a multiple speed that can be programmed in the starter Imagine you have a big plant in your factory, the voltage will go down/up when the plant start/stop, cause the sharp start/stop The soft starter is controlling AC motor in soft start/stop to eliminate such problems. Reference: http://www.softstarter.org


How many soft restarts does it take to get a shiny starter?

it could go on and on. have to be lucky


What are different types of starters?

DOL, Star Delta, Soft starter, VFD