0
What else can I help you with?
What is working principal of startor motor?
A starter motor operates by converting electrical energy from the vehicle's battery into mechanical energy to initiate the engine's operation. When the ignition key is turned, the battery sends current to the starter motor, which engages a solenoid that pushes a pinion gear to mesh with the engine's flywheel. The motor then spins, turning the flywheel and, consequently, the engine's crankshaft, allowing the engine to start. Once the engine is running, the starter motor disengages to prevent damage.
What motors is used in railway engines for traction?
dc series motor :A series-wound DC motor has a low resistance field and armature circuit. Because of this, when voltage is applied to it, the current is high. (Ohms Law: current = voltage/resistance). The advantage of high current is that the magnetic fields inside the motor are strong, producing high torque (turning force), so it is ideal for starting a train. The disadvantage is that the current flowing into the motor has to be limited, otherwise the supply could be overloaded and/or the motor and its cabling could be damaged.
In DC motor is the armature plus brushes resistance substantially the same for every rotational position of the armature?
yes
How to control motor rpm?
For AC motor, you can change motor RPM by changing its supply voltage or by changing supply frequency. For DC motor, you can change motor speed by controlling armatyre voltage or field current.
What is the starter size Amps for 45KW 3Phase AC Motor connected to the pump?
160 Amp. MCCB 45 KW Contactor (67.5-112.5) Thermal Over Load
Why you use starter in DC motor?
to control on of operations
What dc motor uses a two point faceplate starter?
kn
How do you start a motor without a starter?
By the use of auto transformer and bridge rectifier we can start dc motor.
Why a DC motor starter is called 3 point starter?
Because it has three terminals L , F and A L - Line (connected to Supply) F - Field (connected to field of dc motor) A - Armature (connected to armature of DC motor) that's y it is called 3 point starter :)
What device may be wired into the starting circuit of a motor to improve the starting torque?
I assume a 3 phase, AC induction motor. A star delta starter or a soft starter can be used. A soft starter is better compared to a star delta starter, but it is more expensive.
Where do you find dc motors?
Examples of DC electric motors are the starter in your car and the motor in a DC controlled elevator, to name just two.
Explain the necessity for the use of a starter with a dc motor?
In its simplest form, the starter of a dc motor is a variable resistance in series with the armature circuit of dc motor to reduce the high starting current so that the armature winding does not get overheated and burnt while the motor isgetting started. As the rotating armature of dc motor picks up speed, the starter resistance is gradually reduced so that the motor is able to attain its full speed when the starter is not expected to offer any additional resistance in series with the armature winding of the dc motor. At full speed the motor starts running normally, of course, without the help of starter. In other words, the starter offers resistance to armature current during starting of dc motor only. Under normal working condition of dc motor , the starter is electrically out of armature circuit of the motor. The starter protects the armature of dc motor from getting damaged. The electromotive force (emf) induced in the armature winding during starting builds up from zero value to max value to restrict the armature current within the permissible value at full speed. As the speed of armature/motor build up, armature induced emf also starts building thus reducing the role resistance offered by the starter, hence requiring it to gradually reduce as the motor picks up full speed.
What are components of a DC motor starter that can be affected by a high starting current if it is not limited?
armature
What is three point dc shunt motor starter?
L , F and A L - Line (connected to Supply) F - Field (connected to field of dc motor) A - Armature (connected to armature of DC motor) that's y it is called 3 point
Why 3 point starter is called 3 point starter?
Because it has three terminals L , F and A L - Line (connected to Supply) F - Field (connected to field of dc motor) A - Armature (connected to armature of DC motor) that's y it is called 3 point starter :)
Soft starter tripping?
Most of the motors are usually controlled by the soft starters which usually trip frequently. One of the steps in find why the soft starter has tripped is looking at the motor circuit protector rating.
Why starter used in DC motors?
starter is used in dc motor to reduce the initial starting torque...so that the dc machine could be protected from damage.... ..and to avoid max ..current flowing ..from it it can damage whole ..moter structure
