RJ-11 is simply a standard conventional telephone jack, and RJ is short for "registered jack." If you find two RJ-11 connectors on the back of a computer, it means the computer has a dial-up modem. One of the connectors connects to a telephone wall jack. The other connector can be attached to a telephone. Most modems were made to where if the modem is in active use, any phone plugged into the modem would be disconnected so as to not interfere with the modem.
Ethernet and modem.
RJ11(Registered Jack-11) has 4 to 6 pins. Generally 4 ports are there in RJ11.
Are USB and PS/2
Greetings,The part of the computer that does the "thinking" (doing the calculations) is the Processor/CPU ((Central Processing Unit))And the part of the computer that does the "remembering" is the harddriveYou have two more that I can think of: RAM ((Random Access Memory)) and GPU ((Graphical Processing Unit))I will try to make those two simple:RAM is the working memory of the computer because it is much faster to get data from the RAM then the Harddrive (RAM is 100'000 faster then a Harddrive! o.O)And the GPU is basically just a processor, just for working on sending pictures to your screen (So that the CPU can work on other things instead :) )I hope this answered most of your questions! :)
a usb cable is a cable that allows the computer to communicate with the object u are connecting it to. For example there is a computer powered fan which is connected to a computer using an usb cable
Generally speaking, a phone jack is a small, plastic, standard sized connection that is used to plug a telephone line into an outlet on a wall. Sometimes the both the outlet and the jack itself are referred to as phone jacks. Phone jacks usually have two pairs of wires, red and green, yellow and black. A phone jack is a modular (RJ11) socket in the wall, phone, fax machine, modem , or computer device that lets you insert a telephone wire with modular connectors at the end to allow connecting a communicating device to the telephone system. Not all modular connectors are the same. RJ11 is used for phone systems. RJ45 are different sized connectors used for internet (ethernet) wires. Before modular connectors became popular, a phone jack was a square shaped jack with a round hole in each corner. A wire from a phone would end in a plug similarly shaped with metal connectors that would insert into the holes in the jack. To prevent plugging in incorrectly, some of the holes were positioned off center.
On the inner fender on the drivers side. Will have two connectors (one large) .
The RJ-11 jack has four pins on it but, in normal application, only two are used - the center two, called ring and tip.
I presume you mean computer systems, in which case Sun Accounts and Sage would be two.
You need to connect the speaker out on your PC to the audio input on your TV. You need an adapter cable, as the computer usually has a minijack connector and the TV usually has two RCA connectors
Ethernet and modem.
A SCSI connector is used to connect computer parts that use a system called SCSI to communicate with each other. Generally, two connectors, designated male and female, plug together to form a connection which allows two components, such as a computer and a disk drive, to communicate with each other. SCSI connectors can be electrical connectors or optical connectors. A "Mac Stack" of external SCSI devices displaying various SCSI connectorsThere have been a large variety of SCSI connectors in use at one time or another in the computer industry. Probably no computer interconnect (with the possible exception of RS-232 serial) has caused as much confusion. Twenty-five years of evolution and three major revisions of the standards resulted in requirements for Parallel SCSI connectors that could handle an 8, 16 or 32 bit wide bus running at 5, 10 or 20 Mbit/s, with conventional or differential signaling. Serial SCSI added another three transport types, each with one or more connector types. Manufacturers have frequently chosen connectors based on factors of size, cost, or convenience at the expense of compatibility.SCSI often makes use of cables to connect devices together; in a typical example, a socket on a computer motherboard would have one end of a cable plugged into it, while the other end of the cable plugged into a disk drive or other device. This would mean that four connectors were involved in wiring the disk drive and computer together: the connector on the motherboard, the connectors at each end of the cable, and the connector on the disk drive. It is sometimes possible to have cables which have different types of connectors on them, and some cables can have as many as 16 connectors (allowing 16 devices to be wired together). Some types of connectors are typically used inside a computer or disk drive case, while others are used to connect a computer to a separate device such as a scanner or external disk drive.
For Two Connectors on a motherboard for two 40-pin data cable.
Yes, there are two PATA connectors available on the motherboard, so you can connect PATA hard disk through this motherboard.
1. No.2. You probably don't. Many older floppy cables had several connectors on them to facilitate connecting two drives, with one of two possible connectors.
P8 and P9
Like yourself, the computer determines the network address of the network it's on from the IP address plus the subnet mask.