0
What else can I help you with?
What are the similarities between rj 45 and rj 15?
Differences between RJ-11 and RJ-45: • RJ-11 (connectors) have positions for 6 wires (3 pairs), used primarily used for voice transmission over typically 2 ranging up to 6 of the wires. • RJ-45 has 8 wires (4 twisted pairs), primarily used for data transmission over 4 to 8 wires. • Connectors are physically different sizes. That said, they have many similarities as well. Some you may not have thought of: • RJ-11 and RJ-45 both have pin spacing that is identical. This is by design. • RJ-11 and RJ-45 both have connectors of identical height. • RJ-11 and RJ-45 both use the same shape and size centralized plastic locking pin. Thus, the only sfdifference being RJ-45 allows for 2 extra pins and is a slight bit wider. So In a pinch, an RJ-11/14 6 wire cable can be used to connect two RJ-45 devices provided that that RJ-11 cable has all four or six wires and the RJ-45 socketed devices are only 10 or 100-base-T (sub gigabit) devices as they only use 4 wires. Gigabit devices require use of all 8 wires so it doesn't work for 1000-base-T devices. Also, if the RJ-11 cable is flat-wire (not twisted pair UTP) then the run will have to be very short due to noise considerations. This makes it harder to achieve full speed on 100 Megabit class connections.
What are the 8pins of RJ- 45?
RJ-45 connectors feature eight pins, each designated for specific functions in networking. The pins are typically used for transmitting and receiving data, with four pairs: pin 1 (transmit +), pin 2 (transmit -), pin 3 (receive +), pin 4 (unused), pin 5 (unused), pin 6 (receive -), pin 7 (unused), and pin 8 (unused). In standard Ethernet wiring (like T568A and T568B), the pairs are configured differently but serve similar roles for data communication over networks.
How tall is RJ Rude?
RJ Rude is 6' 8 1/2".
RJ-11 modem port connects a laptop to a cable lan?
no the rj-11 connection on the back of your laptop is part of the internal dial-up modem and therefore is a phone and is for connecting to a telephone line. it has six-wire conducters in it and is smaller than the lan wire which is called r45 which is an 8 conducter wire. they are not compatible they do not speak the same language. did you check and see if you have a port on the laptop that says t-10/100 ethernet? if you have an ethernet port that is how you would connect this computer to your home network.
What is one and three eighth inches divided by six?
One and three eighth inches = 11/8 inches; 11/8 divided by six = (11/8)(1/6) = 11/48 of one inch.
An RJ-45 connector is comprised of how many pins?
An RJ-45 connector has 8 pins.
More about rj 11 and rj 45 cables?
RJ11 and RJ45 are the names for the terminators at the ends of the cables. RJ11 is the 2 pair (4 wire) terminator used for telephones. RJ45 is the 4 pair (8 wire) terminator used for ethernet cable.
What is fifty-six seventy-sevenths in simplest form?
8/11
What is the difference between rj15 and rj45?
Cat5 cable is the standard cable for computer networking. The "RJ" in RJ15 stands for registered jack. This is the part at the end of a cable that can be used to connect them to computers, phones, etc.
What is the remainder of 94 divided by 8?
11.75
Who wears number 8 for the Detroit Lions in 2012?
RJ Archer
What is a 25-pin connector used to connect a printer called?
A printer cable can connect to a serial printer using a 25-pin "RS-232", DB-25 connector, among other things. In many cases, only a few pins of the defined 25 pins are used (e.g., send, receive, common). There are also adapters that convert between the 25-pin connector and, say, RJ-11 phone cord, RJ-45 Cat 5, or even screw terminals for 3-conductor cable, or what-have-you, for connection to the computer (e.g., a DIN-8 in a Mac), or a converter for USB to RS-232. If it is a Male connector on PC it will be 25-pin Serial Port, If it is a female connector (purple colored if latest) it is parallel port, sometimes called Printer Port(LPT) - Naresh , InfoMax
