the two main types of RAM are: SRAM- static random access memory which is faster but more expensive it also takes up valuable space. It tends to be used for cache memory and it doesnt have to be periocically refreshed. DRAM- dynamic random access memory, the most common type of RAM, an advantage of DRAM is its structural simplicity.
Volatile memory refers to RAM that needs to be constantly refreshed to be retained. Static memory is permanent storage that is retained even after the computer is turned off.
RAM is random access memory which can be written to and read. ROM is read only memory which is programmed to do a specific job, it can not be edited after it has been burnt ROM-- When viewing on a computer, Read Only Memory is information you can read and cannot click or cannot make it operable. It is not accessible. RAM--When viewing on a computer, Random Access Memory is information you can access and you can click and you can make it operable. It is accessible.
Read-only memory (ROM) in a computer is a type of non-volatile memory that stores data permanently and cannot be easily modified or erased. Unlike random-access memory (RAM) which is volatile and temporary, ROM retains its data even when the computer is turned off. ROM is typically used to store essential system software and firmware that is necessary for the computer to function properly.
A computer has two types of memory, RAM or random access memory and ROM or read only memory. With read only memory, the computer can read the memory but can not change it. It tells the computer how to work. Random access memory is memory that can be changed. It tells your computer what to do. Once you are finished with the random access memory, you can use the space it occupied for other tasks. The two are analogous to the way your body works. You have both kinds. If you tell your hand to pick up a pencil, you are using random access memory. You are telling your hand to do one of many possible different instructions. You do not need to tell your hand which tendons, muscles, veins, arteries, nerves, and bones to use in the process. Those instructions are built in. That is analogous to read only memory. Soon after you picked up your pencil, you have forgotten you picked it up. You have started to draw a picture or add some numbers. You are using your short term memory for something else. It does not matter what. Soon you will forget that also. You will forget the start of a project. You will remember the finished product. You may save that. You can not save that in random access memory but you can save your drawing or math homework.
RAM stores frequently used data from the hard disk. This is necessary as the hard disk is many times slower than RAM, which means it will take much more longer for the computer to read the data.
There are two types of memory access. 1- uniform memory access (uma) 2- non-uniform memory access (numa)
RAM (Random Access Memory) and ROM (Read Only Memory).
Types of Memory:- 1.ROM(Read Only Memory) 2.RAM(Random Access Memory)
There is no such thing as "random only memory" The two main types are: RAM: random access memory ROM: read only memory ROM is memory that does not change, it is "read only" the system reads it, uses it and never changes what is stored within it RAM allows random access types, reading, writing, moving. Its fully adaptable to whatever it is asked to do from moment to moment.
Hard drive, ROM (read-only memory) and RAM (random access memory)
The 5 types are: SIMM DIMM SODIMM SORIMM RDRAM The basic types are volatile memory such as RAM memory and 'permanent' memory such as hard drives USB, external drives and CD/DVDs
ROM (Read only Memory) and RAM (Random access memory). However, there are loads more types of computer memory than these two.
Volatile memory refers to RAM that needs to be constantly refreshed to be retained. Static memory is permanent storage that is retained even after the computer is turned off.
Basically main memory is referred as Random Access Memory (RAM) because it is possible to randomly select and use any location of this memory to direct store and retrieve data and instructions.
Cache memory is a memory that is used by CPU so that the average time to access the memory is reduced. It is a smaller and faster memory that stores copies of data which is used in frequently accessed main memory locations, On the other hand, Primary memory is the main memory of the computer. The processor can easily access, store and retrieve information from the primary memory. Primary memory has two types, Random access memory and read only memory.
Random Access Memory, it is called main memory because processor only access data from RAM. Various types of RAM in market today, such as DDR, DDR2, DDR3. Different motherboard supports different RAM, but before purchase it you must choose maximum size and speed of RAM if your motherboard support.
There are two different types of RAM: DRAM (Dynamic Random Access Memory) and SRAM (Static Random Access Memory). DRAM is more common. It needs to be refreshed about 1,000 times per second. It also supports access times of about 60 nanoseconds. SRAM is more expensive. It does not need to refresh so it is faster than DRAM. It supports access times as low as 10 nanoseconds.