indicates drive A
What is the pin number for the ribbon cable?
Under parallel ata, two types of ribbon cable are used. The 80-conductor ide cable has 40 pins and 80 wires Forty wires are used for communication and data, and an additional 40 ground wires reduce crosstalk on the cable. An older 40-conducror cable has 40 wires and 40 pins. the two types of cables are PATA and IDE cables which come in a 80-conductor IDE cable and a 40-conductor cable
IEEE 1394b
There are two types, a 25 pin male to 25 pin female, and the most common, 25 pin male to a Centronix, which is what printers use. There are 25 pin cables that is not are not printer cables, but they are very uncommon. Almost all the time when someone refers to a parallel cable they are referring to a printer cable, which is a 25-pin to Centronix cable.
Pin 6
used on a floppy
pin 1 goes here
3 types of ribbon cables found in a PC are, a 34-pin floppy drive cable with twist, a 40-pin IDE cable with 40 wires, and a 40-pin IDE cable with 80 fine wires(80 conductor cable)A floppy drive cable, an IDE cable, and a CD or DVD drive cable
ATA Pin 1
The red stripe marks pin one, which ensures the ribbon cable is pushed into the socket the correct way round.
For Two Connectors on a motherboard for two 40-pin data cable.
The floppy drive data cable has a stripe denoting pin #1...PIN #1 on the FDD cable must be aligned with PIN #1 on the drive connector, or the drive will not work...This misalignment does not damage the drive, but the activity light will stay on constantly...To correct this, turn the computer off, reconnect the data cable aligning the pins correctly & reboot the computer....
What is the pin number for the ribbon cable?
The white/green (stripy green) transmits data using pin 1 & 2. The white/orange (stripy orange) receives data using pin 3 & 6. In TIA/EIA T568A standard pin 1 & 2 or pair 3 transmits data while pin 3 & 6 receive data. In TIA/EIA T568B its the other way around because the order of the wires is changed, so pin 1 & 2 receive data while pin 3 & 6 transmit data. The colors will vary depending on where you buy your cable from.
Under parallel ata, two types of ribbon cable are used. The 80-conductor ide cable has 40 pins and 80 wires Forty wires are used for communication and data, and an additional 40 ground wires reduce crosstalk on the cable. An older 40-conducror cable has 40 wires and 40 pins. the two types of cables are PATA and IDE cables which come in a 80-conductor IDE cable and a 40-conductor cable
Floppy data cable is 34 pin flat cable having two connectors for floppy drive. The floppy drive connected at the end connector is A: and the another connector disk is B:..
IEEE 1394b