It depends what context...
I think you are talking about when a computer is starting up (pressing the power-button)
That means one of two things.
1) The hard drive where your Operating System (Windows XP, Windows Vista, Linux, MAC OS X) is not present, or not properly connected to your computer.
2) If the hard drive is successfully connected, there is not an Operating System Installed on that hard drive, and thus it will not start your Operating System
Either way, I think this message is preventing the startup of the Operating System.
The meaning of the error "Ethernet adapter local area connection 3- media state media disconnected" is that the cable is bad or not plugged in all the way to the media device. It is best to check the cable and make sure that it is plugged in.
if by "twisted pair cable" you mean a cat5 cable which is commonly used as an ethernet cable. then it´s made of copper.
indicates drive A
Red represents the right channel
Usually when people talk about a phone cable or a phono cable they mean a 1/4" cable. Mono mean that it only caries one signal with it (a hot signal and a ground, Or + and - ). Thus it has two pins on it. A stereo cable would have three pins so it could have two separate sounds (one for each ear). They call them phone cables or phono cables because i believe they used to use them in the old phone switchboards in the past. So get a 1/4" male mono cable.
The meaning of the error "Ethernet adapter local area connection 3- media state media disconnected" is that the cable is bad or not plugged in all the way to the media device. It is best to check the cable and make sure that it is plugged in.
Shift cable has unhooked, fluid too low, transmission failed.Shift cable has unhooked, fluid too low, transmission failed.
Same prob bra
Media services often means social media services, such as Facebook or Twitter. It can mean sending a picture or a video. They are present in everyday life.
1) Check light of CPU, if it is blinking or orange -> monitor data cable is failed. 2) If light is constantly ON -> motherboard problem. 3) If light is OFF, -> power cable or socketis gone !!!!!!!!!!!!!!!11
do you mean your car won't display your car speed ? is that what you mean ? check the speedometer cable on your car. check the speed sensor located at the end of the speedometer cable. check the plastic gear inserted on the transmission at the end the speedometer cable. get a qualified technician who can work on your car.. it may require the instrument panel (gauges assy) be remove to unplug the other end of the cable..if cable type is used. some vehicles use wire and sensor.. if so, no need to remove gauges, just check sensor and the gears inserted to transmission.
this means either engine management system has failed or engine check is required
C & S Audience is a term used in media research (TAM reports) referring to Cable & Satellite Audience..
Usually the injector pump has failed. You will also want to check the lift pump.
This is actually coming from your monitor. I am assuming you cannot get a picture on your screen. It is telling you it cannot detect any input signal. You just need to check where the monitor cable is plugged in and ensure its in the right spot.
failed
The Spanish word "media" is used for "mean"; for example, the "media aritmética" is the "arithmetic mean" (also known as average). "Media" alone would simply mean "average".