A Berg connector is used for providing power to floppy drives and sometimes other peripherals.
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?berg mini-molexmolex.20-pin ATX connector
The "F" connector is the most common type that is used on RG6 cable. This is the universal connector for home use of RG6 with antennas, CATV, satellite, and consumer electronics.
The connector used to terminate Ethernet cables is called an RJ-45 connector. They are the clear plastic connectors you see at either end of an Ethernet cable.
The Socket 478 connector is used for Intel Pentium 4 processors and their Celeron equivalents.
The type of connector is used by the analog modems is RJ11 or RJ45.
This is commonly referred to as a "Berg connector", after it's original manufacturer, the Berg Electronics Corporation.
berg
4-Pin Berg connector
4pin
a cable from the power supply to the Berg power connector on the FDD a cable from the 20-pin ATX power connector socket on the motherboard to the Berg power connector on the FDD
A "Berg" connector.
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?berg mini-molexmolex.20-pin ATX connector
your power supply has a small plug attach to it with several larger ones that go to your cdrom and hard drive it will fit in to the back of your floppy
it is in the ash tray. pull the ash tray all the way out and you will see the connection.
A Molex power connector is a 4-pin power connector found in most computer power supplies. It is used to provide power to large internal drives like hard drives and CD/DVD drives. They are slowly being replaced by SATA power connectors, which are easier to install can cannot be inserted incorrectly. They should not be confused with a Berg connector which is much smaller and is used to power floppy drives. The molex connector is used for IDE drives
This is a connector used in serial and parallel ports.
This is a connector used in serial and parallel ports.