0
What else can I help you with?
What is strobe input in multiplexer?
It is the enable line. Used to enable the multiplexer to function. For low enable multiplexers, strobe is set to 0 to enable the multiplexer whereas in high enable multiplexers, it is set 1 to enable the multiplexer.
What combines individual SONET signals on the transmitting end and another multiplexer separates combined signals on the receiving end?
Multiplexor
How many 2X1 multiplexers are used to implement 8X1 multiplexer?
7
Another name for ripple?
Another name for ripple is undulation.
We connect 8 computers to a statistical multiplexer at 56000 bits.second what is the maximum rate any one of the 8 computers can transmit?
pcworld
What advantage does a statistical multiplexer have over a TDM multiplexer or an FDM multiplexer?
Statistical multiplexer does not reserve time slots or frequencies. Instead, it dynamically allocates bandwidth only when it is needed.
What advantage does a statistical multiplexer have over a TDM multiplexer or FDM multiplexer?
Statistical multiplexer does not reserve time slots or frequencies. Instead, it dynamically allocates bandwidth only when it is needed.
What are the differences between electronic multiplexer and mechanical multiplexer?
An electronics multiplexer will select an output by a digital code. a mechanical multiplexer will select an out by a mechanical switch of sort possibly driven by a motor
What is strobe input in multiplexer?
It is the enable line. Used to enable the multiplexer to function. For low enable multiplexers, strobe is set to 0 to enable the multiplexer whereas in high enable multiplexers, it is set 1 to enable the multiplexer.
What does a multiplexer look like?
Physically a multiplexer usually looks like a box of some sort. More important is what is inside. The inside of a multiplexer contains a switch or switches, a power supply, and the electronic circuits to manage the system. One link is to informative datasheets for a couple of multiplexer Integrated Circuits from which much can be learned about multiplexer characteristics. There are many, many more kinds of multiplexer ICs.
How do you make 24x1 multiplexer circuit using 8x1 multiplexer?
24-to1mux circuit
What combines individual SONET signals on the transmitting end and another multiplexer separates combines signals on the receiving end?
Multiplexor
What combines individual SONET signals on the transmitting end and another multiplexer separates combined signals on the receiving end?
Multiplexor
What is multiplexer memory?
Multiplexing is a method that allows multiple signals or data streams to be combined on a single signal. The multiplexer memory, therefore, is the ability for the multiplexer to remember the data as it was supposed to be, and where it was needing to go.
What is multiplexer in digital electronics?
A multiplexer, sometimes referred to as a "multiplexor" or simply "mux", is a device that selects between a number of input signals. In its simplest form, a multiplexer will have two signal inputs, one control input, and one output. An everyday example of an analog multiplexer is the source selection control on a home stereo unit.
How do you design an 8-to-1 multiplexer using a 4-to-1 multiplexer and a 2-to-1 multiplexer?
To design an 8-to-1 multiplexer using a 4-to-1 multiplexer and a 2-to-1 multiplexer, first, connect the eight input signals to two 4-to-1 multiplexers. Use the first 4-to-1 multiplexer for inputs 0-3 and the second for inputs 4-7. The outputs of these two 4-to-1 multiplexers will then be fed into a 2-to-1 multiplexer. Use the two select lines of the 4-to-1 multiplexers to choose between the outputs, and a third select line to determine which group of inputs (0-3 or 4-7) is selected.
What is the use of demultiplexing?
A: Multiplexer sends gabs of information on one line the multiplexer decodes what is designed to select from the data
