Heat Number or Cast Number, when refering to metallic component certification, is the identifying number issued to the original cast of a metal from which a component is manufactured. It is normally accompanied by a certificate containing the chemical analysis of the cast material.
Specific heat of sinter
"Flame" is the visible energy when burning something. "Heat" is given off a flame and countless other things. Flame produces heat, but heat does not always generate from flame, and heat almost never produces flame (friction might count). And if you want the definitions: HEAT: a form of energy that is transferred by a difference in temperature. FLAME: the process of combustion of materials producing heat and light and (often) smoke. If you want to think of it a different way: Flame is what you see when you look at a fire and heat if what you feel from the fire.
A heat sink is usually something that draws something away from an electrical componet (Ex: ICU's, Processors and transistors) APEX- A device that absorbs and draws heat from a hot object, dispersing it into the surroundings.
**** you.......... pls somebody answer Double pipe heat exchanger consists of two concentric pipes of different diameters.One pipe is for hot fluid and another is for cold fluid.Both may have same flow direction(COCURRENT) and opposite direction(COUNTERCURRENT). Shell and tube heat exchanger consists of a shell in which large number of parallel tubes are present.One fluid hot or cold flow in shell and other hot or cold flow in the tubes. Also in case of shell & tube(S&T) the hot fluid will have more turbulence than in double pipe heat exchanger (HE) since there are no of tubes within a shell the area for convective heat transfer is considerably increased. so these are much more preferredTherefore the rate of heat transfer is greater in shell and tube because large surface area and enough contacting time
There is no such thing as a "heat sync". There is such a thing as a "heat sink", this is a piece of finned metal that is a good conductor that is placed into thermal contact with the CPU or GPU chip to take away the heat produced by the chip when in operation to prevent it overheating.
He is number 1 for the Miami Heat
LeBron James is number 6 for Miami Heat.
Chris Andersen is number 11 on the Miami Heat.
Greg Oden is number 20 on the Miami Heat.
Justin Hamilton is number 7 on the Miami Heat.
Mario Chalmers is number 15 on the Miami Heat.
Norris Cole is number 30 on the Miami Heat.
Rashard Lewis is number 9 on the Miami Heat.
Shabazz Napier is number 13 on the Miami Heat.
Shane Battier is number 31 on the Miami Heat.
Toney Douglas is number 0 on the Miami Heat.
Udonis Haslem is number 40 on the Miami Heat.