In digital circuits, Parallel Counters are series of n flip-flops. It has 2n states. The notion of the word parallel is that, a clock pulse is given at-a-time to all the flip-flops. It may be fed directly. or alternatively, it may be ANDed with some other variable (for example output of previous stage, some other stage etc.).
One may have a look at this image :
http://www.csbdu.in/virtual/DIGITAL%20MUP/3.2_clip_image015.jpg
mod 8 counter mod 8 counter
What are the parallel ports on a computer commonly referred to as?
A "serial to parallel" converter converts a serial data connection to a parallel data connection. For example, in computer storage, there are controller chipsets that convert SATA (Serial ATA) to PATA (Parallel ATA, also called IDE or EIDE).
What are the various Control measures to counter disadvantages of using a computer system?" What are the various Control measures to counter disadvantages of using a computer system?"
EPIC, which stands for Explicitly Parallel Instruction Computing.
Counter-current flow is more efficient then parallel flow. Shahzad, MUET Chemical Engineer
The parallel counter incorporates carry lookahead circuits so that all flip-flops in the counter change in sync with the clock pulse. The ripple counter each flip-flop output is the clock for the next flip-flop, causing the most significant bit of the counter to settle only after a long delay time from the input clock pulse.
Ball valves: The handle will be parallel to the pipe when on and perpendicular when off. Gate valve: Clockwise off, Counter-Clockwise on.
Two planes do not intersect at all if the planes are parallel in three-dimensional space.
Cut it off with the blade of a disposable craft knife held almost parallel to the counter. Remove remains with acetone or lacquer thinner.
A cheque is crossed (two parallel lines) to show it can only be paid into an account. A cheque untouched i.e. no lines is called open, and can be cashed over the counter.
For 4 stroke engines parallel twin is compact needs only 1 cylinder head and potentially less valve train but I think they need more crankshaft counter balancing. its mostly a packaging advantage in my opinion.
If they were not actually parallel then they would not be parallel lines!
A for loop is just a while loop with a built-in counter. For example, the following programs are functionally identical: While loop: int counter = 0; while(counter < 10) { printf("counter = %d\n", counter); counter++; } For loop: for(int counter = 0; counter < 10; counter++) { printf("counter = %d\n", counter); }
The 5 to 3 direction of one strand runs counter to the 5 to 3 direction of the other strand
a counter is a counter which counts the data and the decade counter is the counts the decade ones
parallel