mac-address
Physical and MAC addressing are found in the OSI layer 2?
i have working in 16f77a kit . the problem is i can't downlode the program in the kit
logical address is called as global address and physical address is called as local address .the ip address,which is used by the user in the network is found to be global for use and it is easily identified in any network .physical address is mac address ,which is stored in the nic card,which is mainly used ,when the system is connected in the network using switch
The first place would be the ROM BIOS. Then the BIOS checks your storage devices and tries to load the boot area from the first available one it finds, and the boot sector then starts the operating system.
The hardware is usually connected by cat5 or cat6 cables. The wall sockets that they are usually plugged into run to a switch or switches that enable them to connect via more cables to the patch panel where the servers are also connected. each item would have its own static IP address(or in some cases they would use DHCP to assign them) so it could be found on the lan. IP addresses allow the switches and routers to direct the input from the computers to the proper machine.
On a Linux machine, the MAC address for an interface can be found in the /sys/class/net/<interface>/address file, where <interface> is the name of the network interface (like eth0 or wlan0). Additionally, the MAC address can also be viewed using the ip link show <interface> command. For IPv6 specifically, while the MAC address itself doesn't change, it can be used to generate the Interface Identifier in the IPv6 address format.
It depends on the machine. However, the MAC address is usually found in the network interface properties.
The data link layer header contains the source's physical address. It refers the address that is found in the Network Interface Card.
her father found it in her room
how can i install video capture hardware???my PC saying video capture hardware not found
One can find hardware supplies at any local or national hardware store, such as Ace Hardware. Hardware supplies can also be found at large department stores such as Walmart and Target.
Hardware won't be recognized if no drivers / software have been installed for that piece of hardware.
The main hardware found in a PC includes: * Motherboard * CPU * RAM * Hard drive * Graphic adapter There are, of course, variants to the hardware depending upon who made the computer and the footprint of the case.
MDI stands for multiple document interface, more information and an explanotion can be found on wikipedia. Multi document interface is the opposite of singe document interface.
the source of all coded information can be found in DNA. DNA is composed of amino acids.
A media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment. Everything attached to any computer network has a permanent MAC address that moves with the hardware no matter where it is connected.IP address is the current interface address for your local system to the larger public internet. The IP address can be STATIC (permanently assigned) or DYNAMIC (changes every time you connect to the internet).The alphabetic names are for humans. They are translated to the xxx.xxx.xxx.xxx format for the computers to use. When you type in the name of a website the name is looked up by your browser.The MAC address is for hardware. The IP address is for communication on the internet.A printer (and any other hardware) on your local network has a unique MAC address. It will have the same IP address as your internet access. xxx.xxx.xxx.xxx:pppp. The X's are your IP address. The P's are the port address for the printer (or other hardware)If you would like to find the MAC Address for your device, then you will need to open Command Prompt. (Search for CMD.exe) or go to Start, All Programs, Accessories and then Command Prompt. A black window will open and ask you to type something in. You need to type: 'getmac' without ' ' and it will show you your MAC Address.For your IP Address, it's the same method, except you type in: 'ipconfig'. If you want a more detailed view, then it's 'ipconfig /all'
Add/Remove Hardware or Install New Hardware Device.