0
routing refers to deciding the route of the packet from one system (a computer) to another system (a computer). It involves many intermediate routers and routing table knowledge.
forwarding is a rather simple process of passing a packet from one port/interface to another port /interface. It generally involves one of the routers and routers forwarding table information
That's what they called call forwarding service in telecommunication.
Wiki User
∙ 14y ago
Wiki User
∙ 14y agoRouting means finding a suitable path for a packet from sender to destination and Forwarding is the process of sending the packet toward the destination based on routing information.
Forwarding is achieved In telephony using a call forwarding service.
Wiki User
∙ 12y agoBoth of these are used in the network layer for the purpose of data sending on different paths.
In the forwarding network layer function, the data or packet is transferred form one incoming link and then reached to the other outgoing link, the main thing is that all these transfer of packets is done within a single router. When any packet reach at the input link of the router, then router must have to transfer the packet to its correct output link.
On the other hand the routing function is used to send the packets form one PC to another PC within two different routers. Its means that routing occur between the two routers of network, their combined communication by means of routing protocols decide the routes or paths, that packets would acquire, on their journey from source to destination. It is the responsibility of the network layer that, it would decide the appropriate path for the packet, for sending it to its desired receiver. For selecting the correct path for sending the data, the network layer use the routing algorithm. The routing algorithm is responsible for choosing the best path out of many paths. Means the path which is more clear, short and with out hurdles.
Wiki User
∙ 16y agoRouting is based upon IP address and switching is based upon hardware MAC address. See OSI model - Layer 2 vs Layer 3.
Add your answer:
Earn +20 pts
6 What is the difference between SS7 routing and IP routing?
qual a diferenca entre tcp/ip e ss7
What is the command used to configue a static route for a router?
ip route {destination prefix} {destination prefix mask} {interface OR forwarding router's IP address}
What is a network interface print device?
The routers are configured with different versions of RIP. R2 is not forwarding the routing updates. The R1 configuration should include the no auto-summary command. The maximum path number has been exceeded.
Which routing protocol is used to exchange data between two different ISPs?
BGP
Routing that is done without guides is known as what kind of routing?
it is known as bee routing
Where is the routing?
It is the process of forwarding packets in a network so that it reaches its intended destinations. To perform routing there are numbers of routing algorithm .
Is the routing?
It is the process of forwarding packets in a network so that it reaches its intended destinations. To perform routing there are numbers of routing algorithm .
What are the two most important network layer functions in a datagram network?
Forwarding and Routing.
6 What is the difference between SS7 routing and IP routing?
qual a diferenca entre tcp/ip e ss7
What is the difference between interior and exterior routing protocols?
Interior routing protocols are used to communicate within a single autonomous system. Exterior routing protocols are used to communicate between multiple autonomous systems.
Difference between of rip v1 and rip v2?
Rip V1 is Classful routing protocol Rip V2 is Classless routing Protocol
What is difference between static and alternate routing in a circuit switching network?
Static routing is fixed, alternative routing is dynamic and therefore adaptive. If a primary route is fails, static routing will not adapt and routing is lost. However, alternative routing will dynamically change in order to maintain routing.
What is a router and what are its purpose?
router networking/roo't*/ A device which forwards packets between networks. The forwarding decision is based on network layer information and routing tables, often constructed by routing protocols.
What is the difference between recipe and routing in sap pp?
It is basically the same. The routing is used in discrete manufacturing, the recipe is used for the process industry solution.
What is Difference between IP Base and IP Services in switches?
IP base support static routing and default routing but ip services supports dynamic routing like ospf ,bgp and eigrp.
What is a routing?
Basically, a route is a way or a predetermined or planned way in order to reach a certain destination or place.
Which can exist in a distance vector network that has not converged?
routing loopsinconsistent traffic forwardingno traffic forwarding until system convergesinconsistent routing table entriesrouting table updates sent to wrong destinations
