The purpose of the command is to send a ping request to the IP address 127.0.0.1. The IP should respond with a "pong" if it accessible. As the address 127.0.0.1 is the originator of the ping request, it should always respond unless something is wrong with the TCP/IP stack.
A loopback address test. The IP Address 127.0.0.1 always refers to the local computer. If the local computer does not respond, you can assume there is a problem with the TCP/IP configuration.
The address 127.0.0.1, called the "local loopback", is an alias for your own computer - the computer from which the command is given.
ping 127.0.0.1
The ping 127.0.0.1 has host name Loopback, and is used to ping your server to verify software. On the command prompt, the technician would type, PING '127.0.0.1' or PING LOOPBACK.
I believe you are talking about the "PING" command. Open a "command" prompt and type ping/? it will give you all the parameters.
PING is what you need to use . Ping 127.0.0.1
Ping command for example "Ping 127.0.0.1" Which is the loop back address
ping 127.0.0.1
The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.
PING command verifies the existence of a node on a network. Ping command is a command of command line interface . It is used to check if the host is alive or not.
Send it the SIGQUIT signal.
TCP/ IP stands for transmission control protocol / Internet protocol suite. Ping is a command of command line interface . -t in TCP IP ping means to repeat the ping command continuously.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.
Ping command is used to check the network connectivity. You can use ping command from windows shell only, not from DOS OS as DOS does not supports networking. You can use "-t" switch with ping for continuously network checking.Syntax: Ping Example: ping 192.168.1.15 or ping 192.168.1.15 -t or ping -t 192.168.1.15
The ping command is to check that an IP address is reachable. the ping command is used to know the active networks and ip address in the network. it also used to self check the address when there is connection trouble with other system. internet control message protocol is used by the ping.
USE THE PING 127.0.0.1 COMMAND AT HTE COMMAND PROMT
The ping 127.0.0.1 has host name Loopback, and is used to ping your server to verify software. On the command prompt, the technician would type, PING '127.0.0.1' or PING LOOPBACK.
yes it is an external command.
Running the ping command with -n "count" is the number of echo request to send.
A ping command is used to check whether the host is alive or not. A ping command is used when you want to check if the host can send or receive packets. The protocol that is responsible for Ping command is ICMP.