this is a class c network address and the subnet mask is by default
255.255.255.0 or /24
There are two types, a 25 pin male to 25 pin female, and the most common, 25 pin male to a Centronix, which is what printers use. There are 25 pin cables that is not are not printer cables, but they are very uncommon. Almost all the time when someone refers to a parallel cable they are referring to a printer cable, which is a 25-pin to Centronix cable.
classfull netwok means all range of IPs have the same of subnetmask classless network means there is different in subnetmask of networks for examble i have two network connected through routers the first network ip is 192.168.2.0 255.255.255.192 the secound network ip is 10.1.2.1.0 255.255.255.240 for more information contact me on monkez_3@hotmail.com
eee
70-45=25
Wingull evolves at level 25 into pelipper
194.117.0.0 . Because it is a class C IP address.
16 bits example class b: nnn.nnn.0.0 - nnn.nnn.255.255 subnetmask: 255.255.0.0 example class c (8 bits): nnn.nnn.nnn.0 - nnn.nnn.nnn.255 subnetmask: 255.255.255.0 exaple class a (24 bits): nnn.0.0.0 - nnn.255.255.255 subnetmask: 255.0.0.0
A broadcast network use to advertise the subnetmask of a particuler network
255.255.248.0
Breaking of protocol into different fragments in order to identify the network in simplified manner by establishing a virtual subnet for a particular group of computers to the main server in a big network of computers.
Good question - I think the best reason is that you can move nodes between networks by changing the configuration at the switch. With different subnets you may have to physically move the device to get it into another subnet.
You can't find the gateway or any other address in a subnet mask; the subnet mask is used to separate the parts of an address - the network id part and the host id part. Look at other settings for the gateway, such as ipconfig or ifconfig
Presuming that the objective is to find the longest mask with a non-zero host portion, consider 180, which is 0b10110100. 5 bits would be the longest possible mask, so a /29 (24+5) would be the longest legal mask. /30 would have the host number as zero which is not allowed.
right click on my network , select property, again right click on the icon, select internet protocol tcp/ip, click on use the ip address and give the ip address & subnetmask u want , click apply and ok. now ip address will be change.
-25 - 25 = -50-25 - 25 = -50-25 - 25 = -50-25 - 25 = -50
You're right, Ryan. It's 25.
Half of 50 is 25