if i was to remove metal i would use pliers
The tool, long nose pliers or needle-nosed pliers, is used for holding small objects in places where fingers cannot reach.
A scriber is a tool used to etch something on a material. The scribes I've used are a pointed piece of metal you can use to do such things as make an indent on wood to mark where a hole is to be drilled.
A screw picker is a small tool used to handle small screws during small intricate repairs. The screw picker has a small claw that can be extended and grasp the small screw to twist it in place.
data table
The specialized tool for this is usually called a "crimper" or "crimping tool". A knife or cable stripper may also be helpful to remove the outer jacket of the cable; a lot of crimpers have a built-in piece to do this (though the knife or cable stripper generally works better).
A punch.
A grater
First you need to remove the steering wheeel. 2 remove the hazard switch screw, remove the 3 screws holding the turn signal switch, you need to remove the plastic cover below the drivers side to get access to the wires for the turn signal switch unplug the wires for the turn signal switch slide the turn signal switch up no need to remove if. 3 you can get a tool from a parts store to compress the black metal cover it does have a plastic cover over the metal,the tool will screw onto the column then tighten the top of the tool down and this will compress the spring below the black cover, with a couple of small screw drivers you can remove the metal clip that holds the black cover down, with clip removed loosen up the tool remove the tool the clip and the blcck cover. 4 there is a torx screw that holds the lock assm.in remove the screw and the lock assm. will pull out
NO, a chisel is not a measuring tool. It is a cutting tool for removing small pieces of wood in very precise areas, as for installing a hinge or a lock plate in a doorjamb.
a bottle opener
First, connect the phone to the computer. The micro USB port is on the top side of the phone. You'll need a Phillips or a flathead screwdriver to remove the top case. Use a spudger tool (or your fingernail) to open the back case. The different types of tools which you require for an iPhone repair are: Small metal tool. Small plastic tool. Small cloth/rag. Small rubber gloves. Small screwdriver. Small needle nose pliers. Small adhesive. Lighter. Small tube of alum.
on both sides of the radio u have 2 spring like clamps that hold it in. u have to somehow get all 4 pushed in to remove the radio out They make a tool for this. the tool is 2 U shaped looking pieces of metal that are round. On the front side of the radio the are 4 holes you push the tools in forward which relieves the spring tesion and pull on the tools the radio slides out towards you. You can get the tool at any auto store for around $5.00.
its located behind the harmonic balancer, you must have a special tool to remove it. then there are four small screws that remove the cap.
A pair of tweezers can easily be used for these purposes. Many computer technicians will also have a "grabber", which is a small pen-shaped device that has retractable metal tongs.
This small , short bladed tool is used for clipping threads and ripping seams.
Easy use a quick disconnect tool or a small screwdriver
man+metal=tool