0
The specialized tool for this is usually called a "crimper" or "crimping tool". A knife or cable stripper may also be helpful to remove the outer jacket of the cable; a lot of crimpers have a built-in piece to do this (though the knife or cable stripper generally works better).
What else can I help you with?
What is the cable or communications technology that computers must access to communicate across a network?
The __________ is the cable or communications technology that computers must access to communicate across a network. Select one: a. Protocol b. Software c. Medium d. Connector
What is the name of the connector used on a network cable?
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
Which cable connector is used in a 1000BaseT network?
10base-T uses for twister pair cable which speed 10mbps.
Identify the connector that can be used to connect RG6 cables?
The "F" connector is the most common type that is used on RG6 cable. This is the universal connector for home use of RG6 with antennas, CATV, satellite, and consumer electronics.
Difference between telecom network and computer network?
A Telecom network is a Telephone and Cable TV Network. A computer network involves computers.
Which procedure is normally performed when connecting a computer to an Ethernet network for the first time?
Attach a cable that has an RJ-45 connector
What procedure is normally performed when connecting a computer to an Ethernet network for the first time?
Attach a cable that has an RJ-45 connector
What is an RJ45 Connector used for?
An RJ-45 connector is the the connector at the end of a Cat-# cable (also known as a lan cable/network cable).
Which network connector do you use to connect small form factor devices in a network via fiber optic cable?
LC Connector MT-RJ Connector
How do you attach a connector to a piece of cable tv?
You need a special tool that is sold at most home centers. You will not get a tight fit without it, the tool is worth it. Cut the insulation back (The tool and connector will have the correct lengths in the instructions), push on the connector, and crimp it.
What is the most common type connector used with coaxial cable on a ThinNet internet network?
BNC Connector
What is a crimping tool used for?
Crimping tools are designed to connect a connector to a cable. It is used on phone cables as well as network cables. All you do is place the connector with wires into the tool and squeeze the handle.
What is the small plastic connector called that is on the end of a network cable?
RJ-45
What type of network cable should be used to attach to an existing one?
an RG-6 Cable should be used. Trolled
What is a possible effect of improperly applying a connector to a network cable?
Data transmitted through that cable may experience signal loss.
What is the most common type connector used with coaxial cable on a ThinNet Ethernet network?
BNC
What are the step to create cross network cable?
To create a Crossover Cable, wire one connecter to the T568A Network Standard and wire the other connector to the T568B Network Standard, so the cable 'crosses over', A becomes B and visa versa.
