0
10base-T uses for twister pair cable which speed 10mbps.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the name of the connector used on a network cable?
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
Identify the connector that can be used to connect RG6 cables?
The "F" connector is the most common type that is used on RG6 cable. This is the universal connector for home use of RG6 with antennas, CATV, satellite, and consumer electronics.
What connector is used to terminate Ethernet unshielded twisted pair UTP cabling?
The connector used to terminate Ethernet cables is called an RJ-45 connector. They are the clear plastic connectors you see at either end of an Ethernet cable.
It is a copper-cored cable surrounded by a heavy shielding ang it is used to connect the computers to the rest of the network?
It is an ethernet cable.
What cable is used to connect computer to a switch?
Straight through ethernet cable (CAT 5/5e/6)
What is an RJ45 Connector used for?
An RJ-45 connector is the the connector at the end of a Cat-# cable (also known as a lan cable/network cable).
What is the most common type connector used with coaxial cable on a ThinNet internet network?
BNC Connector
What is the most common type connector used with coaxial cable on a ThinNet Ethernet network?
BNC
What connector used with a thin coaxial cable?
A thin coaxial cable that is used as a connector is also called a thinnet. It is popular in linear bus networks.
What is the most common type connector used with coaxial cable on at ThinNet Ethernet network?
BNC connecter
Which connector is used for utp cabling on a network?
The media connector between the NIC and the UTP cable is a RJ-45 Internetworking with Cisco and Microsoft pg. 229
Name of a cable connector that would be used if the cable was coaxial?
BNC connector
What is the name of the connector used on network cable?
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
What is the name of the connector used on a network cable?
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
Which connector do you use in LAN network?
the popular connector used in lan network is RJ45
What is the common term used to describe an 8p8c network cable connector?
The most popular connectors found these days on the ends of network cables are commonly called RJ45 connectors.
What is a crimping tool used for?
Crimping tools are designed to connect a connector to a cable. It is used on phone cables as well as network cables. All you do is place the connector with wires into the tool and squeeze the handle.
