x(x-1)=2y
8*7/2=28
28 lines
asdfasdf
handshaking is basically two computers ensuring they have a connestion over a network
Internet is needed for computers to communicate with each other.INTERNET - Is an electronic communications network that connects computers network worldwide.- the most popular modern communication tool.- is a giant network.Another AnswerAll that's needed for computers to communicate is a pair of wire connected to a communication port and software to drive some protocol. There are many ways for computers to communicate with each other. The Internet is "the most popular modern communication tool", but it is not the only way to transfer data.
The software needed to set up a WAN network include a router of some sort to have network connectivity. Additionally, software would be needed on every computer that would be connected to the WAN network.
I'm going to assume you mean computer network. The first thing you need is multiple computers. You can have a small network of computers all connected to the same router and set up to share with each other. If you want to get bigger you need at least one server with server OS installed. There is of course the various routers needed and usually an internet connection controlled by the server.
Each computer needs a network card (NIC); you need a hub or switch; and for every computer you need a network cable to connect to the switch.
handshaking is basically two computers ensuring they have a connestion over a network
Internet is needed for computers to communicate with each other.INTERNET - Is an electronic communications network that connects computers network worldwide.- the most popular modern communication tool.- is a giant network.Another AnswerAll that's needed for computers to communicate is a pair of wire connected to a communication port and software to drive some protocol. There are many ways for computers to communicate with each other. The Internet is "the most popular modern communication tool", but it is not the only way to transfer data.
Not all - although most 'modern' computers do. Modern computers tend to be supplied with either an 'on-board' network adaptor or network card plugged into one of the slots on the motherboard. Older computers came without a network card, and needed additional hardware to connect to a network.
Not all - although most 'modern' computers do. Modern computers tend to be supplied with either an 'on-board' network adaptor or network card plugged into one of the slots on the motherboard. Older computers came without a network card, and needed additional hardware to connect to a network.
Start
The software needed to set up a WAN network include a router of some sort to have network connectivity. Additionally, software would be needed on every computer that would be connected to the WAN network.
A commander phone is used in office settings and in call centers. Used properly it becomes a central hub to all of your communication needs, allowing you to network before phone lines and computers as needed.
to be able to own in 2v2 arena on WoW. umirin
A computer network, or simply a network, is a collection of computers and other hardware components interconnected by communication channels that allow sharing of resources and information.[1] Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote device, then the two devices are said to be in a network. Simply, more than one computer interconnected through a communication medium for information interchange is called a computer network.
Four. Four pins ie.,TXD,RXD,RTS and CTS. U wil need to use the others in case of devices like modem ,etc.For communication between 2 computers u can avoid thm.
There are a few essential components needed to successfully set up a network for an office. The most important components will be an Ethernet router. The size of the router and the number of ports will depend on the amount of people that will be connected to the router. Ethernet cabling is also essential to connect the computers to the router. Connecting the router to a modem is also necessary in order to connect all the computers on the network to the internet.
Dial-up is used on telephone lines. It is the slowest type of connection. Cable modems are high speed connections that travel over cable TV systems. Then there is DSL (Direct Satellite Link). DSL is also high speed but a satellite dish is needed to connect. So any of these methods are needed for a network to connect to the internet.