0
Category 5 cable (Cat 5) is a twisted pair high signal integrity cable type. This type of cable is used in structured cabling for computer networks such as Ethernet and ATM, and is also used to carry many other signals such as telephony and video. Most Category 5 cables are unshielded, relying on the twisted pair design for noise rejection. Category 5 has been superseded by the Category 5e specification.
What else can I help you with?
Difference between telecom network and computer network?
A Telecom network is a Telephone and Cable TV Network. A computer network involves computers.
The network administrator needs to connect two routers directly via their FastEthernet ports What cable should the network administrator use?
straight cable is needed when connecting two computer periperhals. A cross over is used when connecting a computer to a network hardware (router, swirch, etc..)
Your yellow cable from your router has nowhere to fit in your computer you have a netgear 4 port router?
'Yellow' is descriptive but does not identify the cable. A description of the ends of the cable would be helpful. However, if your computer is connected to the network then the yellow cable is unnecessary. It may be a management cable or an alternative connection. If your computer is not connected to the network then it is likely that the yellow cable is the rj-45 connection and that you need to install a network card for your computer.
What does a network cable is unplugged mean?
A network cable is not plugged in to your computer or to a device on the other end.
What controls the flow of data between the computer and network cable?
The Network Interface Card (NIC) or modem (Dial-up) controls the flow of data between your computer and the cable.
Does a computer network use cable television station to transmit data?
no
If you were going to connect two personal computer together in a single network using the network ports on each personal computer what type of cable would you use?
You would want to use get a crossover cable.
Difference between telecom network and computer network?
A Telecom network is a Telephone and Cable TV Network. A computer network involves computers.
What kind of cable are you going to use if you want to network two computer units only?
It is known as across-over cable.
What kind of cable do you use to connect a computer to a network?
You would use a network cable to connect a computer to a network. The type of cable and its electrical, possibly optical, and mechanical attributes depend on the network's pysical layer.Networks use a variety of fiber optic cables, coaxial cables, single twisted-pairs, double and quadruple twisted-pair cables. Other forms exist, including those not requireing a dedicated cable (such as some devices designed for networking over power line), or not requireing a cable at all (such as devices designed for networking over radio frequency connections).
How to network computer notebooks?
Plug the cat5 cable in or use the wireless mode--- magic you are networked.
What is a good type of network cable for a computer?
Category 5e is a good type of network cable for a computer. They have a high signal-to-noise ratio.
The network administrator needs to connect two routers directly via their FastEthernet ports What cable should the network administrator use?
straight cable is needed when connecting two computer periperhals. A cross over is used when connecting a computer to a network hardware (router, swirch, etc..)
What type of cable do you use to connect computer to switch?
Typically you would use a CAT-5e or CAT-6 UTP (Unshielded Twisted Pair) network cable.
What is the cord called that you use to connect your xbox 360 hard drive to your computer?
Cat5e Network Cable.
Your yellow cable from your router has nowhere to fit in your computer you have a netgear 4 port router?
'Yellow' is descriptive but does not identify the cable. A description of the ends of the cable would be helpful. However, if your computer is connected to the network then the yellow cable is unnecessary. It may be a management cable or an alternative connection. If your computer is not connected to the network then it is likely that the yellow cable is the rj-45 connection and that you need to install a network card for your computer.
What purpose does an Ethernet cable serve?
An ethernet cable is a network cable that is used to connect your computer or other web-enabled device to the internet. You can use an ethernet cable to establish a wired connection from your computer to a router or modem to connect to the internet.
