What is a major advantage of UTP?
It is inexpensive. It limits the number of hosts on a network. It is an inexpensive way to interconnect remote locations. UTP stands for Unshielded Twisted Pair. Unshielded means just as its name suggests. It offers absolutely NO protection against EMI, or electromagnetic interference.
UTP cables are Unshielded twisted pair cables.they uses twisted pair of wires to cancel out the electromagnetic interference and cross talk bw two wires .
most common seen example of twisted pair cable is CAT 5 cable.This type of cable is used in structured cabling for computer networks such as Ethernet and ATM, and is also used to carry many other signals such as telephony and video.
"UTP" is "unshielded twisted pair". By far its most widespread use is in telephone wiring, although it's
capable of high speed data transfer over limited distances, such as RS-232, T1, Ethernet, etc. http://en.wikipedia.org/wiki/Twisted_pair
what is the full form of utp
It depends on the type of LAN; the most common cable in a LAN is UTP cable. In older LAN types you could also use coaxial copper cable. For UTP cable that would be Cat 5, cat 5E or above for most LANs.
I believe its UTP
It depends on how it is wired, not on the type of cable. You can do bidirectional data over just two wires.
There are several different cables that you can use for this process. They include a cross over cable or an uplink.
conduit
Coaxial cable, STP cable, UTP cable
3
Most UTP cable is limited to 100 meters.
Actually, a UTP cable doesn`t have any shielding. UTP stands for Unshielded Twisted Pair.
Typically a straight thru UTP cable can be used.
land tester is use for check a utp cable..if is worth
it is a point where a UTP cable connects to the device
UTP cable, BNC connector, STP cable
The maximum distance a utp cable can handle is 100 m. If you need to bridge over 200 meter and you can only utp cable, you will need to put in enough hubs or switches so that the length of utp cable is never more than 100 m. You can forego of the utp cable and make use of COAX cable. A good quality cable will transmit signals over around 300 m. distance. You can forego of the utp cable and make use of fiber optic cable. Then you can transmit signals over a 40 km distance. Wireless Microwave and WiMax would be an option to cover the distance using radio waves.
what is use cross overcable
crossover cable
To connect a PC to a switch you should use a straight through UTP cable.