answersLogoWhite

0

What else can I help you with?

Continue Learning about Computer Science

The two parts of MAC addresses?

Yes - the first bits specify the network, the remaining bits, a host within a network. There is no fixed number of bits for the network; this may vary.Yes - the first bits specify the network, the remaining bits, a host within a network. There is no fixed number of bits for the network; this may vary.Yes - the first bits specify the network, the remaining bits, a host within a network. There is no fixed number of bits for the network; this may vary.Yes - the first bits specify the network, the remaining bits, a host within a network. There is no fixed number of bits for the network; this may vary.


How many bits comprise the network portion of a class c address?

Thirty bits make up the network portion of a class C address. Three bits are borrowed for the subnet mask. There is also a class A and a class B that are comprised of bits.


What is the valid ip address with network number 190.254.0.0 using 11 bits?

This assumes you know how to subnet. On a network with 190.254.0.0 as a host address and using 11 bits for the subnet mask. The network address is 190.224.0.0 and the end of the range is 190.255.255.224. The address you show is within this range so cannot be the network address. If you don't know how to work this out manually use a subnet calculator such as the one on this URL: http://www.boson.com/FreeUtilities.html


What is classful network?

classfull netwok means all range of IPs have the same of subnetmask classless network means there is different in subnetmask of networks for examble i have two network connected through routers the first network ip is 192.168.2.0 255.255.255.192 the secound network ip is 10.1.2.1.0 255.255.255.240 for more information contact me on monkez_3@hotmail.com


How many network and host bits are available for class C IP address?

By default Class C subnet mask is 255.255.255.0 = 24 bits for network id and 8 bits for host id. in Binary 1111 1111. 1111 1111. 1111 1111. 0000 0000 Here all 1s are Network bits and all 0s are host bits. For this subnet mask you can have 256 hosts. And you can use 254 host and asign IP address to them. By Saurabh

Related Questions

How many network and host bits are in a slash 16 network?

Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.


In bits before subnetting how large is the host portion in a Class A network?

In a class A network, the first 8 bits specify the network, the remaining 24 bits specify the host.


The two parts of MAC addresses?

Yes - the first bits specify the network, the remaining bits, a host within a network. There is no fixed number of bits for the network; this may vary.Yes - the first bits specify the network, the remaining bits, a host within a network. There is no fixed number of bits for the network; this may vary.Yes - the first bits specify the network, the remaining bits, a host within a network. There is no fixed number of bits for the network; this may vary.Yes - the first bits specify the network, the remaining bits, a host within a network. There is no fixed number of bits for the network; this may vary.


How you subnet ip address using class b?

Same as subnetting any other class, or a classless network. From the bits originally reserved for the host (16 bits, in the case of a class B address), you "borrow" some bits, that is, you use them to specify the subnet. The remaining bits specify an individual host within a subnet.


Which set of bits in a standard MAC address are assigned by the manufacturer?

In a standard MAC address, the first 24 bits are assigned by the manufacturer and are known as the Organizationally Unique Identifier (OUI). This unique identifier is used to identify the manufacturer of the network interface card (NIC). The remaining 24 bits are assigned by the manufacturer to uniquely identify the device within their range of addresses.


What is the build in identifying address coded into the NIC?

The built-in identifying address coded into a Network Interface Card (NIC) is called a MAC address. It is a unique identifier assigned to the hardware by the manufacturer and is used to identify devices on a network. MAC addresses are typically 48 bits long and are displayed in hexadecimal format.


What the definition of network id?

A network ID refers to a part of a TCP/IP address that is used to identify the subnet that a host may be on. The subnet that the computer is on is determined by the netmask and IP address of the computer. This subnet address is the same as the network ID and is the beginning part of the computers IP address. When the netmask is setup, it is a number where some of the most significant bits have a 1's value and the rest have values of 0. The most significant part of the netmask with bits set to 1's specifies the network address, and the lower part of the address will specify the host address. The part of the IP address that matches the part of the netmask where the bits are set to ones determines the network ID.


What is the maximum number of bits that can be borrowed with class b?

The maximum number of host bits that can be borrowed from a class A address is 22 (technically you could borrow 23 but the resulting network would be useless). A class A address uses 8 bits for its network address and 24 bits for its host addresses. Class A uses a subnet mask of 255.0.0.0 You can only borrow 22 bits (instead of 24) because a valid network requires 4 addresses: A network address, two host addresses and a broadcast address. These networks would result in 30 bits used for the network address and 2 bits used for the host addresses. These networks use a subnet mask of 255.255.255.252


How many bits comprise the network portion of a class c address?

Thirty bits make up the network portion of a class C address. Three bits are borrowed for the subnet mask. There is also a class A and a class B that are comprised of bits.


How do you know how many bits represent the network portion and the host portion?

When we express an IPv4 network address, we add a prefix length to the network address. The prefix length is the number of bits in the address that gives us the network portion. For example, in 172.16.4.0 /24, the /24 is the prefix length - it tells us that the first 24 bits are the network address. This leaves the remaining 8 bits, the last octet, as the host portion.


What is specified by the host bits in an IP address?

The network part of an IP address indicates the network to which the host belongs. The host bits or host part of an IP address points to the actual device that has an IP address on the network. It can be a computer, printer, router or any device with an IP address that has the same network part.


Within a classful addressing subnet mask the bits indicate that corresponding bits in an IPv4 address contain network information?

the 1 bits