0
That would be a distance-vector routing protocol. Examples (taught at Cisco Academies) include RIP, IGRP (obsolete in the new version of the curriculum), and EIGRP - but those are only for IP, and there are also distance-routing protocols for other networking protocols, for example, RIP for IPX.
What else can I help you with?
What two characteristics are commonly associated with dynamic routing protocols?
- provide routers with up-to-date routing tables - consume bandwidth to exchange route information
What is RIP routing protocol?
RIP is a routing protocol - a protocol (set of rules) that allows a router to exchange information, with other routers, about existing routes.
To determine the best path routers communicate with each other through?
routing protocols
What does the passive command provide to dynamic routing protocols?
Perhaps you mean the "passive-interface" command in Cisco routers; what this does is that no information related to the routing protocol will be sent through the specified interface. For example, the interface that connects your network to the ISP should not carry any routing protocol information, since the routing protocol is only useful within your company's network.
What is IGP?
Dear All, Clasful routing protocols will not support VLSM because it doesn't send the subnet mask information along with routing information. Classless routing protocols will support VLSM as because it s sending the subnet mask information with routing updates. Regards, Sivaraj C
What describes the process that routers use within a network to learn each other's routes?
routers use routing protocols to exchange routing information. check out the link below for lots of information on routing protocols.
21 what types of routing protocols allows routers to exchange information about best paths with their neighboring routers only?
distance vector routing
What two characteristics are commonly associated with dynamic routing protocols?
- provide routers with up-to-date routing tables - consume bandwidth to exchange route information
What is Distance Vector protocols?
Distance vector protocols are routing protocols that use the distance and direction to a destination network to make routing decisions. Examples include RIP (Routing Information Protocol) and EIGRP (Enhanced Interior Gateway Routing Protocol). These protocols share routing information with neighboring routers and update their routing tables based on the information received.
What are two routing protocold use by routers to learn remote networks and build their routing table?
Two common routing protocols used by routers to learn remote networks and build their routing tables are Routing Information Protocol (RIP) and Open Shortest Path First (OSPF). RIP is a distance-vector protocol that uses hop count as its metric, while OSPF is a link-state protocol that uses a more complex algorithm based on the state of the links to determine the shortest path. Both protocols enable routers to exchange routing information and dynamically update their routing tables as network topologies change.
What enables routers to automatically manage information received from their own interfaces and from other routers in order to quickly update the routes they know?
routing protocols
When a router learns routes to remote networks from other routers in a network?
When a router learns routes to remote networks from other routers, it typically uses routing protocols such as OSPF, EIGRP, or BGP. These protocols facilitate the exchange of routing information, allowing routers to share and update their routing tables dynamically. As a result, routers can determine the best paths to reach various networks, ensuring efficient data packet delivery across the network. This process is essential for maintaining optimal network performance and connectivity.
What is the differences between routing and routed protocols?
Routing protocols are used by routers (RIP, EIGRP, OSPF) Routed protocols are the actual protocols on the wire (TCP/IP)
Can Routers communicate with each other?
Yes, routers can communicate with each other to exchange information about network paths and manage data traffic. This communication typically occurs through routing protocols, such as OSPF (Open Shortest Path First) or BGP (Border Gateway Protocol), allowing routers to share routing tables and optimize data transmission across networks. By collaborating in this way, routers ensure efficient routing and help maintain network reliability.
What is RIP routing protocol?
RIP is a routing protocol - a protocol (set of rules) that allows a router to exchange information, with other routers, about existing routes.
What is rip protocol?
RIP is a protocol used by routers to exchange information about their routing tables. In dynamic routing, a router learns from other routers about possible routes by advertising what they know. RIP is a protocol that can do that.
What are four ways a routing loop can happen?
A routing loop can occur due to several reasons: Configuration Errors: Incorrectly configured routing protocols or static routes can lead to loops when routers mistakenly believe they have better paths to the same destination. Link Failures: If a network link fails and the routers do not promptly update their routing tables, packets may be sent in circles between routers. Slow Convergence: In dynamic routing protocols, slow convergence times can result in temporary loops as routers continue to forward packets based on outdated information. Routing Protocol Mismatches: Inconsistent routing protocol configurations across routers can lead to conflicting information, creating loops as packets are continuously forwarded between routers.
