0
Add your answer:
Earn +20 pts
A PC makes makes a direct connection to a network by way of?
Network adapter
How difficult is it to set up a home network?
It's extremely easy to set up a home wifi network, as all you need, is an internet connection and service, and then you need to purchase a wireless router.Most wireless routers are plug and play, so you don't need to install them or anything.
Where can one purchase a converged network adapter?
One can purchase wireless network adapters from stores that sell computer related products. Examples of such stores would be Best Buy, Walmart, and Future Shop. One can also purchase wireless network adapters online at websites like eBay and Amazon.
The card provides a port for a network cable to connect the PC to a network?
Lan Card provides a port for a network cable to connect the pc to a network.. LAN : Local area network or Ethernet Card and Network Card
What is a PC network?
Short answer: a network is a group of computers linked by wires or wirelessly. A network can be small like a home network or very large like the internet.
A PC makes makes a direct connection to a network by way of?
Network adapter
Does a computer need a network adapter to be installed in a PC to connect to a network?
yes it does
A PC makes a direct connection to a network by way of a?
Network Adapter ~Matthew Dodge
How can you make your PC stop receiving commands by another PC in your network?
Plug out the network cable in the back, or disable the network adapter from the network connections panel.
What are three general steps which are necessary for installing a network card and connecting a PC to a network?
Check mechenical part, the adapter was installed prorerly and in its place. Check software part, drivers were installed properly. Try to ping the router or the desktop itslelf. It will help only in the case when the adapter was damaged.
Is the Linksys Network adapter for a PC?
Yes.Linksys works fine with any type of computer.
Can I set up a wireless adapter with any device?
Yes, the wireless network adapter allows you to connect wireless with any device supporting it. Laptop come with network card and for old PC you have to buy it.
Is it easy to install the 3Com 10/100 Secure Fiber-FX Network Adapter?
The Secure Fiber-FX Network Adapter is a PCI card.You need to ground yourself against static electricity then put it in the PCI slot.It's not hard,just make sure it's properly seated before you turn the power back on.The PC will probably recognize it automatically when it boots back on.If it doesn't you install it.
Which three steps are required to install a Network Adapter Card?
The three steps required to install a network adapter card are: 1. Shut down the PC and remove the AC power cord, Ê2. Open the computer case and identify the PCI slot on the motherboard and remove ÊtheÊslot insert if one exist, 3. Carefully remove the network card from its envelope and seat it onÊthe slot Êfirmly Êby ÊapplyingÊgentle pressure along its length. Then screw the card to the computer frameÊbefore returning the case.ÊÊ
Can you use your laptop as a PC network adapter?
I set up my obsolete laptop as a temporary wifi hotspot. If that is what you are asking, then yes.
What are the three general steps which are necessary for installing a network card and connecting a PC to a network?
Put the NIC in the PC, and install the NIC's drivers. Configure the NIC using Windows, so that it has the appropriate addresses on the network and the correct network protocols. Test the NIC to verify that the PC can access resources on the network.
What is the function of expansion bus?
Expansion buses basically enable you to install additional hardware in your system unit and PC. The most common type of expansion buses today is PCI and PCIe, and AGP. You can use PCI, commonly white on your motherboard,to install network interface cards, sound cards, etc.. And you can use AGP to install high end video graphics cards, and they are commonly brown on your motherboard. PCIe is another version of PCI, but allows for faster data transfers. ISA was the first type of expansion buses, and it was developed by IBM for use in their early PC. Computerguy1984
