In air conditioning, refrigerant is pumped in through the suction line (the bigger of the two lines) of the condensing unit and cycled through the compressor and into the evaporator unit through the liquid line. Once charged properly, this cycle will continue perpetually until something malfunctions or a leak in the coils or line occurs. In heat pumps the process will reverse itself through its reversing valve while in the heat cycle.
The CPU cycle time is the time between start up and shutdown
When you plot a system on a mollier diagram it the point between the pressure drop and the bottom of the compression line, measured in BTU/LB. Also known as the Net Refrigeration Effect.
the difference is the heat addition type In Otto Cycle the heat addition is Isochoric ((constant volume)) In Diesel Cycle the heat addition is Isobaric ((constant pressure))
Cva:As bus cycle is not mentioned, hence assumed that bus cycle = clock rate = 250MHz.Duration of each bus cycle = 1 / 250M = 4ns; Please, correct me if I am wrong.
In software engineering, the software development life cycle (SDLC), is a process for planning, creating, testing, and deploying an information system. The systems development life cycle concept applies to a range of hardware and software configurations, as a system can be composed of hardware only, software only, or a combination of both. There are usually six stages in this cycle: requirement analysis, design, development and testing, implementation, documentation, and evaluation.
what are the six states of a refrigerant in a refrigeration cycle
The Carnot cycle is an idealized thermodynamic cycle that describes a perfect heat engine. In the Refrigeration system we need cooling effect.so it has to operate in opposite nature to produce the cooling effect. So we run the catnot cycle reversly in the refrigeration system. So we call the Refrigeration cycle called as REVERSED CARNOT CYCLE.
at compressor
suction filter
It is a refrigeration unit based on Vapour Absorption Refrigeration Cycle (typically refrigerants used are Water or Ammonia).
Refrigeration is a process in which work is done to move heat. It was a closed-cycle that could operate continuously, as he described in his patent.
To return oil to the compressor.
Carnot Cycle is an ideal thermodynamic cycle that describes the functioning of a perfect heat engine. In the refrigeration system we need a cooling effect. So, in effect, refrigeration cycle is reverse in process than that of a carnot cycle, and ofcourse not ideal. Air-conditioners also run on the similar cycle as refrigerators.
The quantity of heat that each pound of refrigerant absorbs from the refrigerated space to produce useful cooling.
In practical applications, vapor-compression refrigeration systems are the most commonly used refrigeration systems, and each system employs a compressor. In a basic vapor compression refrigeration cycle as shown in Figure 3.28, four major thermal processes take place as follows: • evaporation, • compression, • condensation, and • expansion.
i think thermal energy and radiant energyPeAcE
Vapor compression in the refrigeration cycle is the process which turns heated vapor into a cold liquid. This allows the coolant to flow through the condenser and cool the air.