read this
What_is_the_difference_between_logical_address_and_physical_addresses
Whatever network that mobile device is currently in assigns the care of address. Since it is only a temporary address for when you are in that network.
To calculate the physical address from a logical address, you can use the base address and offset. Add the base address to the offset to get the physical address. This process is commonly used in computer systems to translate logical addresses to physical addresses for memory access.
A logical (or virtual) address is a reference to a memory location independent of the current assignment of data to memory; a translation must be made to a physical address before the memory access can be achieved. A relative address is the address expressed as a location relative to some known point, usually the beginning of the program. A physical address, or absolute address, is an actual location in main memory.
its 192.168.1.1 /24
logical address is called as global address and physical address is called as local address .the ip address,which is used by the user in the network is found to be global for use and it is easily identified in any network .physical address is mac address ,which is stored in the nic card,which is mainly used ,when the system is connected in the network using switch
Whatever network that mobile device is currently in assigns the care of address. Since it is only a temporary address for when you are in that network.
Usually the router.
OUI
The most logical address used for receiving messages is email. In the past this most logical address would have been a mailing address.
OUI
it assigns IP address to clients
destination host logical address
Stateless address autoconfig
In the 8086/8088 the physical address and logical address have the same importance, because they both relate to the address of the operand. It is true that the offset (logical) address is added to the segment address to determine the physical address, but the limitations of the architecture of the processor forces programmers to consider both.If you are talking about a virtual environment, however, such as in the 80286 or higher, then the logical address is more important than the physical address, because the logical address is the address of the operand, while the physical address is (somewhat) arbitrarily assigned by the operating system.
The Logical address is what we assign to the Network device to identify. for example IP Address.
Yes.
A Physical Address...