You can connect a laptop to a computer using a special USB cable known as a bridge cable, link cable, transfer cable or USB network cable. These cables have a USB A type connector on both ends and the cable itself is joined via a small adapter that controls the data flow and electrical current between the laptop and computer.
WARNING: DO NOT use an A type to A type USB cable to connect two computers! You will likely damage both computers and/or create a fire hazard. Connecting a USB cable in this manner will NOT network the two computers. Check the related link for further warning information.
Laptops cannot be connected directly through USB, without some sort of bridge in the middle. If you ever see a straight Type A to Type A cable, don't buy it. There are two possible methods for networking through USB:
1. File Transfer bridge - This device has a small bridging device in the middle. You need special software on both computers for it to be useful. Belkin is the most notable manufacturer of this type of product.
2. USB Ethernet Adapters. This basicly gives you an Ethernet jack. You can connect the laptops to each other with a patch cable between the two adapters, using standard networking apps. If your laptops already have Ethernet jacks, there is no reason to buy such adapters, and you should use the built-in ones.
Look, USB port has 4 pins.
pin-1 is for power supply
pin-2 for receive data
pin-3 for sending date
pin-4 for ground.
the problem is that at the another end of USB the same pin is there.
but the another PC can't interprete the signals.
because of this
Pin-1 to Pin-1
Pin-2 to Pin-2
Pin-3 to Pin-3
Pin-4 to Pin-4
so send to send and receive to receive is generate.
so we have to change the another end pin as below,
Pin-1 to Pin-4
Pin-2 to Pin-3
Pin-3 to Pin-2
Pin-4 to Pin-1
and that need some programming on which i am working.
Best of Luck
I think we can connect it through lan cable UTP or STP. I tried it but not completed, but there is probably a need of hub or router.
We can connect 2 laptops in lan through a 8 port hub. from the modem the rj 45 cable will be connected to hub or switch and from the hub a 2 seperate rj crossover cable wiil be connected to each laptop.
<a href="http://www.indiaunimagined.com/places-to-visit-in-mumbai/">places to visit in mumbai, India</a>
To directly connect two computers together using an Ethernet Cable you need a special cable called an Ethernet Crossover Cable. It switches the connectors on one end so 'A' on one end is 'B' on the other, and visa versa.
There are specialized cables available but they are more expensive then a hub and network cables.
1. Dial-up - You use a dial-up modem in your computer to connect to the internet over a phone line. 2. Ethernet - You connect to a cable / DSL modem with an Ethernet cable, either directly to the modem or through a router. 3. Wi-fi - You connect to a cable / DSL modem with a wireless card to a router, which is connected to the modem. 4. USB - you connect to a cable / DSL modem directly with a USB cable. 5. 3G - A form of wireless internet that communicates using cellphone towers.
You should be able to access the phone through "My computer".
If you want to connect using cables/wires, you would have to use an Ethernet Cable.Or you can connect to it wirelessly. You must have a 802.11g wireless adapter card installed onto your laptop/computer.
Yes, you can using USB.
This depends on which printer you have.Some printers have a serial cable and the newer ons have a usb cable. You connect the cable to the computer at the back . Then reboot your computer. You then insert the driver CD into the computer and then install the drivers for that printer.
You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.
You can get a cable for your camera which would connect to a computer USB port.
Yes, you can using USB.
via is a word meaning 'through' connect two things together using a USB cable, probably one side to your computer
This is a 25 pin cable, usually used to connect a printer to your computer (parallel port). Most printers connect using the USB cable anymore, as other external devices.
yes you can
You can link up your PC to the CM100 by using an Ethernet cable or USB cord. Connect the Ethernet cable to the CM100 Linksys modem and the other to the Ethernet port on your computer or if you are using USB connect the USB cord to the USB port on the computer.
Use the DVI port. You can use a dvi cable, vga cable (using the dvi adapter that came with your computer), or a DVI to HDMI cable. Just plug the cable into the computer and the tv and your Mac will do the rest.
You can connect other computer to your computer throught different ways.Other computer can be connected to your using LAN cable or usb cables. when other computer is connected to your you need to setup a group in my networks or network option.
download and install itunes, then plug your ipod to the computer using the dock connector cable