answersLogoWhite

0

What else can I help you with?

Related Questions

How many BTUs do I need to cool a 20x9 room?

A romm 20x9 is 180 square feet. You will need 5000 to 6000 BTUs for this.


How many BTU will it take to change 10 pounds of ice at 20 degrees to steam at 220 degrees?

To change 10 pounds of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit, you need to supply enough energy to first melt the ice, then heat the water to the boiling point, and finally convert it to steam. This process requires approximately 180 BTUs per pound of ice to melt it, 180 BTUs per pound of water to heat it to the boiling point, and then 970 BTUs per pound of water to convert it to steam. So, for 10 pounds of ice, the total BTUs required would be around 18,300 BTUs.


Do you polish sch 40 1 1/2" stainless pipe with 180 grit. I have the pipe, I just need it polished. 500' total?

Yes, you can polish an SCH stainless steel pipe (40 1 1/2") with a 180 grit.


How many btus does it take to raise 1 pound of water at 32 degrees to 212 degrees of steam?

It takes 180 BTUs to raise 1 pound of water from 32 degrees Fahrenheit to 212 degrees Fahrenheit to convert it completely into steam. This change in temperature includes heating the water from its freezing point to boiling point, then undergoing phase change from liquid to gas.


How to achieve reflex angle in pipe bending?

Rotate the pipe 180 degrees along a horizontal axis. Or look at the pipe from the other side. An angle that was not reflex will become reflex and conversely.


What holds 180 gallons of water?

A container with a volume of at least 24.06 cubic feet.


How many tens in 1800?

180


How many btus are required to change one pound of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit?

1)This is a 5 part question. The first is realizing that 20F to 32F uses .5BTU per pound per degree. That means it takes 32-20=12*.5=6BTUs to get the ice to 32F. 2)Then you need to know the Latent Heat of Fusion for Ice which is 144BTUs (given). Lets assumes the ice changes from ice to water instantaneously at 32F. 3)Next we calculate the BTUs from 32F to 212F. Which is 1BTU per pound per degree F. 212-32=180 so it take 180BTUS. 4)Next we have to use the Latent Heat of Vaporization of water which will say instantaneously converts water to vapor. This takes 970BTUS (given). 5)Then we calculate the BTUS from 212F to 220F. Which is .5BTUs per pound per degree F which is 220-212=8*.5=4BTUs...... Finally add up all the BTUs and you get 6+144+180+970+4=1304BTUs.


How many BTUs does it take to heat 390 gallon tank of water from 60 degrees to 248 degrees?

The specific heat of water is 1 BTU per pound per degree Fahrenheit. There are 8.3378 lbs/gallon at 60 degrees, which equals 3251.742 pounds of water. The number of BTUs to raise it 188 degrees is then 611,327.496 BTUs.


How many dergress does a hexagon have?

You mean: How many degrees does a hexagon have? 180 degrees for every side added after a triangle. Therefore, 180+180+180+180= 720 DEGREES


180 hours how many hours is that?

180 of them.


How many ft are in 180 feet?

180