0
What else can I help you with?
What problems might occur during the process of updating BIOS?
Dear user , When you update your bios you MUST GET THE BIOS UPDATE FOR THE SAME REVISION OF YOUR BOARD *(note many manufacturers release the same product name but have different updated revisions of your motherboard) so look on your motherboard for what revision it is, otherwise you dont get the same revision then you could potentially brick (permanently kill your motherboard) . Make sure you do it when you have stable electricity (mostly during day) since if the electricity goes out then your bios will be damaged and wont be able to boot unless your board sports a hardware dual bios . If you update from windows close all programs before doing the flash and disable antivirus and firewall since these programs can intercept the flashing software and make it corrupt (bios) , it is best done in dos (bootable flashing located as a standalone bootable progam or from the motherboard bios eg Qflash for gigabyte ,etc)
How do you update bios on my laptop?
I currently am running on a Fujitsu Siemens Amilo li 2727 and i want to find out how i update the bios on my laptop.
Update BIOS settings in compaq presario V3000?
To update BIOS settings on a Compaq Presario V3000, you will first need to download the latest BIOS update from the official Compaq website. Ensure your laptop is connected to a power source throughout the update process to prevent any interruptions. Follow the specific instructions provided with the BIOS update file to successfully update the BIOS settings on your Compaq Presario V3000. Remember to proceed with caution, as updating the BIOS incorrectly can potentially harm your laptop.
What two downloads are usually required to install a BIOS update?
I would have to say that you would need the updater software and the actual BIOS update (firmware)
How do you format computer BIOS?
We can't format bios.it is permanent program.we can flash the bios by upgrading bios update....By ---Rajesh Arthimalla.
What do you need to change an AMD sempron le-1250 with an AMD Athlon 64 x2?
To upgrade from an AMD Sempron LE-1250 to an AMD Athlon 64 X2, you will need to ensure that your motherboard supports the Athlon 64 X2, as both processors use different architectures. You may need to update the BIOS to the latest version for compatibility. Additionally, ensure that your power supply can handle the increased power requirements, and check that your cooling system is adequate for the new processor. Finally, you will need to physically remove the Sempron and install the Athlon X2, applying thermal paste and securing the cooler properly.
Ms 7255 bios Update ver5.60?
tayfun
Could bios update burn the motherboard?
Of course not
Updated bios but version number stayed the same?
that happeds eaither when you update a Bios that you allready have or sometimes its not a full version update for exaple you may be a A06 version but the update was a A06.2 it will only display the A06
if update the bios on an hp notebook what should you do?
Before updating the BIOS on an HP notebook, ensure you back up your important data and check the HP support website for the correct BIOS version for your specific model. Download the BIOS update file and follow the provided instructions carefully, which usually involve creating a bootable USB drive or running the update directly from Windows. Ensure that your notebook is connected to a reliable power source during the update to prevent interruptions. After the update, check the system settings to confirm the new BIOS version is installed correctly.
Can you replace an AMD Sempron 3500 plus with an AMD Phenom?
Processors are generally exchangable, as long as(!) the motherboard support the other processor, both with socket and BIOS compatibility. so probably no you cannot if your running a sempron. unless you are running it on a sweet motherboard and just upgrading from a bare bone setup which i take you are probably not.
Problem with your PC's BIOS I can't use any other option now like change time date and the rest?
Press "Del" & Enter into "BIOS", Update the date & /or Time of the "BIOS" & save it by F10, Say "Y" to confirm after your update.
