0
President Nicolas Sarkozy of France is holding disaster talks Wednesday evening with German and Greek leaders in Cannes, as heads of state start arriving for your two-day summit on the Group of 20 foremost economies.Cannes is much more used to web BMW Radio PIXEL Repair Tools hosting Tom Cruise than Jacob Zuma. However the President of South Africa counts amid a lot more than thirty leaders and best monetary officials meeting right here at the Group of 20 summit. Instead of the renowned Cannes film pageant, this agenda will be dominated by the most current twist inside the European financial debt disaster, next Athens' demand a referendum on its bailout situations. Forward of the summit, European Fee President Jose Manuel Barroso named on Greece to simply accept the terms of your
What else can I help you with?
What is the most common cable used today for connecting a hard drive to the motherboard?
There are different interfaces of which hard drives can be connected to the motherboard of computers. ATA- More commonly ATA-133, the newest version not compatible with ATA-100(phased out) Typically this setup uses a Ribbon cable, however there are "Round" cables that have been made to reduce the turbulence and promote airflow inside the cases. These drives typically do not spin faster than 7,200 RPMS. SATA- Serial ATA, uses a thin small cable, typically red. This is the first version, and finding hardware that SATA I is difficult. these drives typicall do not spin faster than 7,200 RPMS SATA II - AKA SATA 3.0 GB, Uses an identical cable, but transfers data much more quickly. Most hard drives and computer accessories that use SATA are SATA II. Typically SATA II is backwards compatible with SATA I. These drives are currently capable of spinning to a maximum of 10,000 RPMS SATA III - AKA SATA 6GB/s, use a similar cable but transfers data at twice the rate of SATA II and four times the rate of SATA (first version). SATA III is also backwards compatible. In order to take full advantage of the SATA III technology it is necessary to have a SATA III motherboard, cable and HDD. SCSI- Pronounced "SKUZZY" a high speed interface typically only used on High end workstations and servers. Has high bandwidth and uses ribbon cables similar in look to ATA, but has more pins and a different connector. Older versions for SCSI required "terminators" on the empty connectors however they are becomming less prevalent and are typically not used on the current SCSI 320 Format. These drives are typically the most expensive and rotate the fastest typically 15,000 RPM's
Will sata 2 run on sata 1?
Yes, SATA II (SATA 3 Gb/s) devices are backward compatible with SATA I (SATA 1.5 Gb/s) interfaces. This means that you can connect a SATA II hard drive or SSD to a SATA I motherboard, but the drive will operate at the lower SATA I speed. However, if you connect a SATA I drive to a SATA II interface, it will run at the SATA I speed as well.
Ide hard drive can be slave with sata hard drive?
No Master Slave designation needed. SATA Drives are plug-add-play. Improve: SATA (Serial) Attached Drives improve data tansfer speeds up to 10-100 GBytes/per. eSATA are (Externally) Serial-Attached Drives and SATA-II(Sata-2) Drives transfer data @ 300GBytes/per. The next barrier of TerraByte data transfer has been developed and is already in production with a (SATA-3) designation attached
What are the most common HDD standards?
As far as interfaces goes you have two main types SATA and IDE. SATA being the newer of the technologies and using a small plug type cable to connect to your motherboard, where as IDE uses a wide ribbon type cable to connect to a large slot on the motherboard. There are two types of SATA as well. SATA-I and SATA-II. SATA-I runs at speeds up to 150mb/s and SATA-II runs ar speeds up to 300mb/s. Most motherboards these days take SATA-II devices (Hard drives, optical drives). Hope this answers your question.
How much faster is Sata II than Sata?
The Sata II is has a transfer speed that is two times as fast as the original Sata. The Sata has a communication speed of 1.5 Gbit/s while the Sata II is 3.0 Gbit/s.
What size hard drives are available with this laptop?
The HP 8530w laptop can be configured with any of the following hard drives: 120 GB, 160 GB, 250 GB, or 500 GB 5400 rpm SATA II, 160 GB, or 250 GB 7200 rpm SATA II, 80 GB Solid State Drive
What transfer rates are used by sata drives?
Theoretical maximum throughput: SATA II: 3Gb per second. SATA III: 6Gb per second. The maximum uncoded transfer rates are 2.4 Gb per second and 4.8Gb per second, respectively.
What are examples of serial storage devices?
Serial port generally refers to Serial ATA port. These Serial ATA ports are better known as "SATA" ports. You will find them on Hard Drives and Solid State Drives specifically. But you may also find them on peripherals such as card readers for Flash media and Optical Drives. SATA is categorized into 3 categories SATA, SATA II and SATA III. The Function of SATA is to transfer data. Previous to SATA, Computers used "IDE" service which was far slower and more expensive to manufacture than SATA.
Which drive interface supports a bit rate of 6Gbps?
The SATA III (Serial ATA III) interface supports a bit rate of 6 Gbps. This interface is commonly used for connecting hard drives and solid-state drives to a computer's motherboard. SATA III provides improved data transfer speeds compared to its predecessor, SATA II, which has a maximum bit rate of 3 Gbps.
Is Dolby 5.1 backwards compatible with a receiver with Dolby Pro Logic?
If the receiver contains the first edition of Dolby Pro Logic it will not work with Dolby 5.1. If it contains Dolby Pro Logic II or newer technology it will be backwards compatible.
Is Serial ATA interface and sata 3 the same?
Serial ATA (SATA) is a standard interface used for connecting storage devices like hard drives and SSDs to a computer's motherboard. SATA III, also known as SATA 6 Gb/s, refers specifically to the third generation of this interface, which supports data transfer speeds of up to 6 gigabits per second. While all SATA III devices are part of the broader SATA interface family, not all SATA devices are SATA III; earlier versions, such as SATA I and SATA II, have lower speed limits.
What is the transfer speed for sata?
Ø SATA I- 1.5 Gb/sec, SATA II- 3 Gb/sec and SATA III- 6 Gb/sec
