No. I have a compaq and when the computer is turned on, the wireless will turn on no matter what position the on/off switch is in. If you want to turn it off, you must turn the switch to the on position, and then back to the off position.
No, as long as her wireless modem is plugged in and there isn't a password on it, anyone close enough can get on.
If your wireless access point will be connected to the same ISP and your wireless laptop will connect to this access point, there is no single problem with this configuration. Just the bandwith of your internet connection will be shared amongst the two computers instead of only one. Practically means, that is one computer will be downloading some large file, the other computer may experience slower internet connection. But it depends on how fast is your internet connection.
Several possible reasons. First, of course, is that the wireless signal is not there -- you're out of range. Or your wireless card could be turned off -- the wireless light is often a button that turns the wireless networking on and off, or there's a keyboard combo (often Fn/F2) that turns it on and off. Or the wireless access point could be set to not broadcast its name (SSID disabled) -- you need to know the name already, including UPPER and lower case, before you can tell your computer to connect. Or the standards are different: an 802.11n network access point may not see an 802.11g computer, or the computer may be running an out of date variant of the protocol, or the access point may be. And of course the network card itself may have failed; they are built cheap, and surprisingly often the transmitter part burns out.
RAM: Random Access Memory
Random Access Memory (RAM) is the kind of memory that loses its content when the computer power is turned off.
Yes, the computer does need to be turned on for the Nintendo Wi-Fi USB Connector to work, as the computer cannot communicate with any USB devices when it is turned off. However, a wireless router, which connects directly to a modem, works even when the computer is turned off.
True
Your computer is probably not connecting to the wireless signal (also known as wifi) because your wifi card is turned off, or the signal is password protected.
RAM - standing for Random Access Memory. The contents of RAM are lost when the computer is turned off.
True; Make sure that the ESSID/SSID broadcast option is turned off at the access point!
To enable wireless you will have to check two things. 1. Whether the wireless button on the laptop is turned on or turned off. The wireless button is found on the laptop's keyboard or on the side of the laptop. The wireless button will have an icon of wireless antenna. If the light on the wireless button is amber then it is turned off. If the light is blue then it is turned on. 2. We can also enable the wireless from the HP wireless assistant. Click on the start button- in the start serach field write (HP wireless assistant)-- Turn on the wireless network.