Your mom NERD get a girlfriend LOSER
The transformer itself does not pull current. Whatever you connect to the transformer pulls current. Whatever the output voltage of the transformer is, divide that into 600 and you get maximum current possible without burning up the transformer. At 24V that's 25 amps.
The low voltage needs to be stated of the 20 watt lamps.
..the questions does not say wether the 30kVA transformer is 3 phase transformer or single phase transformer..but it is implying that a single phase welding load at 16A per phase is to be connect to it, it is assumed then that the transformer is 3 phase transformer..we assume load is rated 240V.. ..though not much details is given about the transformer voltage specs. but if is rated 3 phase 415/240V, the approx full load current per phase is given by 30KVAx1.3912=41.736A.. ..but if the transformer was rated single phase 240V say, the approx full load current FLC=30000/240V gives 125ampers.. ..if you further devide the FLC by the intended load current.. ..Recommended no of welders per for a 3 phase 415V transformer and assuming single welding sets =41.736/16=2.6..so you can connect max two welding sets to this transformer per phase,..max 6 weld sets can connect at an approx load factor of 76%.. ..for the single phase transformer, FLC/16=125/16, gives 7.8 but is also recommended not to connect more than 6 welding sets to such transformer for the same reasons..
A transformer does many things.
Your question is incomplete -- what about the transformer?
1 wire is input in this type of transformer.
This typically has to do with how many amps you can safely pull from the secondary of the transformer.
You don't need 7.1 sound on your computer as most games don't make use of that many channels and it can cost you a bit more money.
2
2
optimus or bumblebee?
The primary. Many drives do not allow you to connect PF caps directly at the drive. It messes with DC the power supply.