optimus or bumblebee?
To determine the amperage output of a transformer, you need to know the voltage it operates at. Assuming a standard voltage of 120 volts for a household transformer, you can use the formula Amperage = VA / Voltage. In this case, a 60-VA transformer operating at 120 volts would output 0.5 amperes (A) of current.
A step-down transformer accepts a given voltage on the primary winding (coil), and outputs a lower voltage on its secondary winding. A good example is a doorbell transformer you might buy for your home. It uses 120 volts from the house electrical system and steps it down to a safer 18 volts used to ring the doorbell. The voltage produced is a function of the 'turns-ratio' of the transformer. For example, if the transformer has 500 turns of wire in the primary, and 125 turns of wire in the secondary, we would say it has a turns ratio of 4:1 (pronounced "four-to-one"). If we feed 120 volts into the primary, the secondary would produce 30 volts. 120:30 = 4:1
There are normally only one set of primary windings in a transformer. Some may have multiple windings though so that they can cover a wider range of input voltages.
Transformer has windings
how do you make a transformer on incredibots2
A transformer that reduces voltage is classed as a step down transformer.
To convert 7620 volts to 240 volts, you would need to use a transformer. The transformer would step-down the voltage from 7620 volts to 240 volts. The ratio of the turns on the transformer primary and secondary windings determines the voltage transformation.
In a standard transformer, the ratio of input volts to output volts remains constant.
You need a step-up transformer.
If the voltage is AC a transformer can be used.
Rephrase your question, as it doesn't make any sense. If the primary side of the transformer is 480 volts 3 phase, this transformer can be supplied from a breaker as big as 180 amps. If 480 volts 3 phase is your secondary then you can supply up to 180 amps to your loads.
Depends on use,supply,AC,DC .Voltage,transformer ???
Step up transformer.
The kVA rating will be listed on the transformer's nameplate, which is usually on the front of the transformer. The 480v to 120v is irrelevant, because many transformers with different kVA ratings convert 480 volts to 120 volts. The kVA ratings can be different and thus affect the rated current through the transformer.
Volts per hour is an invalid statement. You may have meant Watts per Hour.
2.083 amps
The recommended voltage input for a 220 transformer is 220 volts.