Yes, you can replace a 500W power supply with a 400W one, but it depends on your system's power requirements. If your components draw less than 400W under peak load, the 400W supply may work. However, running a power supply close to its maximum capacity can lead to reduced efficiency and potential overheating. It's generally recommended to use a power supply that exceeds your system's wattage needs for optimal performance and longevity.
You need to make sure you buy a power supply that is rated for your motherboard. Common ratings are 350w, 400w and 500w.
You can purchase a 500W Modular Power Supply online from stores such as Directron. Alternatively, you can purchase a 500W Modular Power Supply from retailers such as Amazon and Newegg.
A power rating is the amount of power a device consumes when operating at full capacity. Typical power ratings of ATX power supplies are 350W, 400W and 500W.
A power rating is the amount of power a device consumes when operating at full capacity. Typical power ratings of ATX power supplies are 350W, 400W and 500W.
3 amps
The bulb takes anywhere between 200w and 400w depending on the size and lumins of the projector. Then there's the electronics and fan. Alltogether a power supply of 220v and 2.5A will be sufficient (500W). However, friends of mine with a 600 VA UPS (Uninteruptable Power Supply) couldn't run their's on it as it may require faster switching then the ups provides.
I would recommend at least 500W!!!
Yes. The EVGA GeForce GTX 750 Ti 2GB requires at least a 400 watt power supply, so it will work.
In Australia, 500 watts is the same as anywhere else in the world. It is a unit of power measurement and would represent the same amount of power whether you are in Australia or elsewhere.
not yet
Logisys is not a reputable/reliable manufacturers. Answer to your question is no. Look of other manufacturers such as Antec, OCZ, Seasonic, etc. Their power supplies in 500W range should easily power up GTX 460.
500W in steel bar means this steel yields 500MPa strength