answersLogoWhite

0

Your amp's got enough power there to blow those speakers to kingdom come, but that doesn't mean you can't use them. At low volume settings, you're nowhere near the maximum output of the amp, so use them, but be careful. You should be able to hear when you're overdriving them.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

What speakers should you use with 500 watt amp?

You need to see specifications of both amp and speaker, though you didn't provided much info you can use around 300W to 400W speakers whichever is available.


Is it safe to connect a 300W amplifier to a 60W speaker?

Safe, as in you're not going to electrocute yourself, yes.<br /> But, the amp will be able to put out more power than the speakers can handle, so don't turn the volume up all the way or you will fry the speakers.


What ASTM steel is equivalent 300W?

Astm a-36


My speakers are 300w peak power with 8 ohm what amp is compatible?

There is no power amplifier with 8 Ohms output impedance. Therefore the usual impedance of this amp is arround 0.1 ohms which is good for bridging your 8 Ohm speakers. Scroll down to related links and look at "Interconnection of two units - Voltage Bridging - Zout < Zin".


Will a xfx nvidia geforce 9600gt xxx edition work on 300w power supply?

Will a xfx nvidia geforce 9600gt xxx edition graphics card work on 300w power supply


What amplifier is needed to drive B and W 801 series 80 speakers?

You can put what you want but with a power rating of unlimited (there are protection circuit's) and an efficiency of 86db/1W/1m you should put at least 300W (real world watts) to them or the midranges will "pop".


Can you run 2 80watt rms speakers Max output 600W each and 2 35watt rms speakers Max 300W each with a 60watt rms x 4 at 4 ohms Max output 700W amplifier?

Yes. Peak power or max output is rubbish. You will never get clarity at a speaker or amp's max output. RMS is what it's all about.


Will a 100rms mini two way car subwhich doesn't need an amp to run work well with two 4 inch 3way 300w speakers and also two 6x9 400w speakers?

There MUST be some sort of amp powering the sub. An amp gives you power much like if you plug a light into a wall outlet. Hopefully there is a second 4-channel amp powering the speakers... Also, are you listing rms or max power for the 4" and 6x9" speakers? What sort of power is being run to the speakers also? Your question needs to be more specific to be able to answer it properly.


What does 300W plate mean?

A 300W plate most likely refers to a heating plate or element that has a power rating of 300 watts. This indicates how much electrical power the plate consumes when in operation, and can give an idea of how hot the plate can get.


Can you connect a 300W amplifier to a 60W amplifier?

The only way to connect a 300W amplier to a 60W amplifier is in series. You would also need to carefully balance the inputs so that the two amplifiers would do exactly their assigned workload. Its not a good idea, however, because the distrortion from the 300W amp would likely overwhelm the capacity from the 60W unit. Besides, 60W is less than -6db difference from 300W. The human ear can only resolve differences of only +/- 3 db, so just ignire the 60W and go with the 300W. Any thing else is likely to wind up being the "distorted" noise that irritates us peace seakers.


What are some of the specifications of the Bose Companion 5?

Some of the specifications of the Bose Companion 5 are: a US power rating of 120VAC ~ 50/60 Hz 300W, satellite speaker dimensions of 8.9 x 5.8 x 3.8 in; 1.9 lbs, and an acoustimass module dimenstions of 8.5 c 6.75 x 16.75 in; 15.4 lbs, acoustimass module is coated in scratch-resistant, satin-finished vinyl and the satellite speakers are coated in a painted polymer finish.


What is difference between A36 steel and 44W steel grade 300w?

A36 steel is a standard mild steel grade with a minimum yield strength of 36,000 psi, while 44W/300W is a Canadian steel grade with a minimum yield strength of 44,000 psi. The main difference lies in the yield strength, with the 44W/300W grade being stronger and more suitable for structural applications that require higher strength.