0
What else can I help you with?
Can you run 2 80watt rms speakers Max output 600W each and 2 35watt rms speakers Max 300W each with a 60watt rms x 4 at 4 ohms Max output 700W amplifier?
Yes. Peak power or max output is rubbish. You will never get clarity at a speaker or amp's max output. RMS is what it's all about.
What does peak power and continuous nominal power handling in car speakers?
Peak power is the highest rated output of the speaker when loud (or peak) parts hit. Continuous/nominal power is the average output at normal and continuous listening levels. If you have the Peak Power rating, you can figure out the nominal level by multiplying the peak power by the square root of two (0.707). Peak Power * 0.707 = Nominal Power.
What size amp do you need for 6 and a half Sony speakers that has 190 Watt peak power and 40 rms and Sony 6 by 9 speakers that has 300 Watt peak power and 60 rms?
200 RMS 4 channel or 2 channel so u know add the rms of the speakers to find the amp rms needed
What size speakers should you hook up to a Jensen lxa 300 power amp?
kicker 10c124 12" 300W 4-Ohm SVC COMPVT Series Component Car Subwoofer Driver (Comp154) better known as 12inch kicker comp. it doesnt cost that much to be a kicker around $60. you can purches this speaker at onlinecarstereo.com or crutchfield.com. when this amp is bridged its 150rms watts and 300w witch is getting the peak proformace out of it. the ratings of it bridged is also what the speaker calls for. so when its matched together dont be afraid to turn up the settings to the max it will hold trust me. this is the set up i have and it sounds great.
I have 900 watt peak power car speakers The rms power is 450.What is the maximum I can run these speakers at and still have it sound clean and good.If i have a amp that lets them go as loud astheycan?
It depends on the quality of the amp...and the speakers..no one can really answer that question with the information you gave. Don't forget that you can permanently damage your hearing by playing music too loud.
What the abbreviation 2500 2500 watts PMPO mean?
PMPO stands for Peak Music Power Output. Its is one of many ways of rating the output capacity of speakers.
How are mackie pro audio speakers rated?
Depends on the speakers. Usually something like 60W RMS, 240W Peak.
Ok so the speakers you have are visonik two 12 1000 watts peak power handling 500 watts rms power handling and your amp is an American pro bass machine with800 watts for max power output?
Yes.
When was Rome's power at its peak?
Rome was at its peak of its power during the reign of Augustus.
What is the conversion for rms power to peak to peak power?
RMS power is Peak-To-Peak power divided by the square root of 2.This definition, however, only holds true for a non-reactive, or resistive, load, with a power source that is truly sinusoidal.
Can two 1300 subs work with a 1200 amp?
Yes, the sub will work fine. Speakers ususally have two ratings, RMS which is constant power handling and peak power- meaning it can handle peaks of the higher rating. If your speaker is rated for 1300 watts then that is likely the peak rating. It is better to use speakers that are rated for more than the power of the amp you are using so there is no chance of blowing the speakers. The speakers will also produce cleaner sound when the amp is running close to capacity without overdriving and distorting the speaker. Also, if the amp is a stereo amp rated for 1200 watts it is only putting out a maximum of 600 watts per channel.
What is the peak power of the Kicker 08DS12L72?
The peak power of the Kicker 08DS12L72 is 1500 Watts.
