code segment
assume cs:code,ds:code
mov bx,1200h
mov cx,[bx]
mov ax,01h
l1:mul cx
dec cl
jnz l1
mov[bx+2],ax
mov ah,4ch
int 21h
code ends
end
You can. There are thousands of microprocessors.
The 8086/8088 family of microprocessors was introduced by Intel.
The 8086 family of microprocessors, including the 8086, 80C86, and 80C86AL, are presented in 40-pin DIP packages.
Ten microprocessors are the 4004, 4040, 8008, 8080, 8085, 8086, 8088, 80286, 80386, and 80486.There are many more, and this list only included some of the Intel microprocessors, in mostly historical order.
E.g. 8085, 8086, 8255, 8051, 6800, 8257, 8251 and many more...
It starts with the 4004 chipset (4 bit) and 8008 microprocessor (8 bit). The successor of the 4004 was the 4040, but this architecture was a dead end. The successors of the 8008 were the 8080, 8085, 8086, 8088, 80186, 80286, 80386, 80486, Pentium, etc. including the current multicore microprocessors. IBM chose to base their PC on the 8086 and 8088, then as successive newer microprocessors were developed new versions of the IBM PC used those microprocessors. Intel also produced many specialized microprocessors and microcontrollers including some RISC microprocessors (e.g. i860, i960). Current Apple Macintosh computers also use the latest Intel multicore microprocessors.
Macro is a segment of code that needs to be written only once but whose basic structure can be repeated with each reference
8086 is a 16 bit processor and 80186,80286,80386,80486.Pentium etc are advanced microprocessors with certain additional features like virtual memory,memory management,protection features etc.Also their operating speed,memory capacity etc varies.They will operate in real mode where its like 8086 and virtual mode in which protection features are enabled
In Multisim, you can find the 8086 microprocessor by navigating to the components toolbar. Look for the "Microprocessors" category or use the search function to type "8086." Once located, you can drag and drop it into your circuit design workspace for simulation and testing. If it's not available in your version, you may need to check for additional libraries or updates.
The most significant difference between the Intel 8085 and 8086 microprocessors is that the 8085 is an 8-bit system and the 8086 is a 16-bit system. This difference allows the 8086 system to have a much larger set of operational instructions and can make calculations to more significant places. Note: the 8085 processor does have two 16-bit registers. The pointer and the program counter.
assembly language program for sorting an array using 8086 microprocessor.
write program to concatenating two sting in 8086 assembly language