0
What else can I help you with?
What routing protocol updates routing tables about every 30 seconds resulting in overloaded network traffic?
RIPv1
What three routing protocols are distance vector routing protocols?
Routing Information Protocol (RIP) and Interior Gateway Routing Protocol (IGRP) are two very popular Distance Vector routing protocols
Which feature of RIPv2 enables it to function as a classless routing protocol?
RIPv2 sends subnetmasks in the routing table updates. RIPv1 does not, which causes it be class-full.
Which two statements are true regarding the function of the RIPv1 routing updates?
1) It is a distance vector routing protocol. 2) The data portion of a RIP message is encapsulated into a UDP segment.
Can you mix RIPv1 and static routing?
RIP V1 dose not support CIDR or VLSM as it a clasfull routing protocol that dose not include the subnet mask.. however if you were to use RIPV2 you could use static routing with it as it is a classless protocol and dose incoperate the subset mask in the update
What are the main differences between RIPv1 and RIPv2?
Classful vs. Classless RIPv1 is a classful protocol, meaning that the subnet mask is not included in the routing updates. With RIP, only the default subnet mask is used to identify networks. RIP v2 is a classless protocol, meaning that the subnet mask IS included in the routing tables.. RIPv2 supports variable subnet masks (VLSM).
Which routing protocol uses hop count as the metric?
RIP (Routing Information Protocol) uses hop count as the metric. It measures the distance to a destination network based on the number of routers (hops) that a packet has to traverse to reach the destination.
What is dynamically as related to a routing protocol?
Dynamically, as related to a routing protocol is a type of networking technique whereby the routing protocol creates, updates and maintains the dynamic routing table.
Which routing protocol excludes the subnet information from routing updates?
RIP VERSIONV1 can be seen to exclude subnet information from routing updates, this is because ripv1 is a classful routing protocol and does not support VSLM, this was corrected in RIPv2 where ripv2 does send out subnet mask's in the form of a prefix eg /24 which is the subnet mask of 255.255.255.0 or a class c address.
Can two applets access each other?
Because RIPv1 is a classless protocol, it does not support this access. RIPv1 does not support discontiguous networks. RIPv1 does not support load balancing. RIPv1 does not support automatic summarization.
What type of routing protocol advertises only new paths to other routers on the network?
link-state routing protocol
Which type of routing protocol used in 3G network?
aodv
